- 您現在的位置：買賣IC網 > PDF目錄378480 > CY2283PVC-1 (CYPRESS SEMICONDUCTOR CORP) PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs PDF資料下載
參數資料
| 型號： | CY2283PVC-1 |
| 廠商： | CYPRESS SEMICONDUCTOR CORP |
| 元件分類： | XO, clock |
| 英文描述： | PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs |
| 中文描述： | 100 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48 |
| 封裝： | SSOP-48 |
| 文件頁數： | 10/12頁 |
| 文件大小： | 219K |
| 代理商： | CY2283PVC-1 |
CY2283
PRELIMINARY
10
Application Circuit
Clock traces must be terminated with either series or parallel termination, as they are normally done
Summary
A parallel-resonant crystal should be used as the reference to the clock generator. The operating frequency and C
of
this crystal should be as specified in the data sheet. Optional trimming capacitors may be needed if a crystal with a different
C
LOAD
is used. Footprints must be laid out for flexibility.
Surface mount, low-ESR, ceramic capacitors should be used for filtering. Typically, these capacitors have a value of 0.1
μ
F.
In some cases, smaller value capacitors may be required.
The value of the series terminating resistor satisfies the following equation, where R
is the loaded characteristic impedance
of the trace, R
out
is the output impedance of the clock generator (specified in the data sheet), and R
series
is the series terminating
resistor.
R
series
> R
trace
– R
out
Footprints must be laid out for optional EMI-reducing capacitors, which should be placed as close to the terminating resistor
as is physically possible. Typical values of these capacitors range from 4.7 pF to 22 pF.
A Ferrite Bead
may
be used to isolate the Board V
from the clock generator V
island. Ensure that the Ferrite Bead offers
greater than 50
impedance at the clock frequency, under loaded DC conditions. Please refer to the application note “Layout
and Termination Techniques for Cypress Clock Generators” for more details.
If a Ferrite Bead is used, a 10
μ
F– 22
μ
F tantalum bypass capacitor should be placed close to the Ferrite Bead. This capacitor
prevents power supply droop during current surges.
相關PDF資料 |
PDF描述 |
|---|---|
| CY2283PVC-2 | PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs |
| CY2291SI-XXX | Three-PLL General Purpose EPROM Programmable Clock Generator |
| CY2291SC-XXX | Three-PLL General Purpose EPROM Programmable Clock Generator |
| CY2291SL-XXX | Three-PLL General Purpose EPROM Programmable Clock Generator |
| CY2291 | Three-PLL General Purpose EPROM Programmable Clock Generator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CY2283PVC-2 | 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs |
| CY2285 | 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:100-MHz Pentium㈢II Clock Synthesizer/Driver with Spread Spectrum for Mobile PCs |
| CY2285PVC-1 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:CPU System Clock Generator |
| CY2285PVC-2 | 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:100-MHz Pentium㈢II Clock Synthesizer/Driver with Spread Spectrum for Mobile PCs |
| CY2285PVC-3 | 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:100-MHz Pentium㈢II Clock Synthesizer/Driver with Spread Spectrum for Mobile PCs |
發布緊急采購，3分鐘左右您將得到回復。