- 您現在的位置：買賣IC網 > PDF目錄369673 > CT1611-FP (Aeroflex Inc.) DMA Controller with Buffer Memory,MIL-STD-1750A Compatible PDF資料下載
參數資料
| 型號： | CT1611-FP |
| 廠商： | Aeroflex Inc. |
| 英文描述： | DMA Controller with Buffer Memory,MIL-STD-1750A Compatible |
| 中文描述： | DMA控制器與緩沖存儲器，符合MIL - STD - 1750A兼容 |
| 文件頁數： | 2/24頁 |
| 文件大小： | 291K |
| 代理商： | CT1611-FP |
2
SCDCT1611 Rev A
been serviced. Use of the interrupts is optional. The interrupt signals
are the same for bus control operation although different in meaning.
Interrupts for received or transmitted data messages are generated
after the DMA transfers have been completed.
The Busy, Service Request, and Subsystem Error bits for the status
word are contained in a dedicated register accessible via I/O. The
Busy bit is set high at power-up as well as via a subsystem reset.
BC OPERATION
The CT1611 is programmable into Bus Controller operation via I/O
from the subsystem. Under Bus Controller mode, there are two
command word registers, a received mode data register, two returned
status word registers, an error latch and a transaction word register.
The first command register is used for all 1553 bus transfers. The
second command register is for the second command word used in
RT to RT transfers or for the associated mode data required for
certain mode codes.
The CT1611 provides full validity checking for all 1553 transfers
and alerts the subsystem, via interrupts, as to whether the transfer
was valid or not. The two status word registers are preset high at the
initiation of a transfer and may be read at completion. The second
status word is provided for RT to RT transfers. The error latch may
be used to determine the nature of a failure should a transfer be
unsuccessful.
The transaction word register is used to define the type of transfer to
be performed, to which bus the transfer is to be made, and to define
which bits (when set) in the returned status word constitute an invalid
transfer.
A polling operation has also been included that enables the CT1611
to automatically load the command words and transaction words
from main memory via DMA. This function allows a
preprogrammed polling sequence of the remote terminals to be
implemented with a minimum of subsystem intervention.
相關PDF資料 |
PDF描述 |
|---|---|
| CT1698 | CT1698 MIL-STD-1397 Type E 10MHz Low Level Serial Interface |
| CT1698FP | CT1698 MIL-STD-1397 Type E 10MHz Low Level Serial Interface |
| CT1775 | CT1775 Universal MacAir/1553 Dumb RTU Hybrid |
| CT1815 | CT1815 10MHz Low Level Serial Interface for MIL-STD-1397 Type D |
| CT1815FP | CT1815 10MHz Low Level Serial Interface for MIL-STD-1397 Type D |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CT1612 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553/ARINC Bus Controller/RTU |
| CT1612DB38400C0FLHA1 | 功能描述:CRYSTAL UNIT WITH THERMISTOR, 1. 制造商:avx corp/kyocera corp 系列:* 零件狀態:新產品 標準包裝:1 |
| CT1612FP | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553/ARINC Bus Controller/RTU |
| CT1616 | 制造商:EDSYN 功能描述: |
| CT16-16P | 制造商:ITT Interconnect Solutions 功能描述:330-0351-016 |
發布緊急采購，3分鐘左右您將得到回復。