參數資料
型號: CBTV4020EE
廠商: NXP Semiconductors N.V.
元件分類: 開關
英文描述: 20-bit DDR SDRAM 2 : 1 MUX
封裝: CBTV4020EE/G<SOT761-1 (TFBGA72)|<<http://www.nxp.com/packages/SOT761-1.html<1<Always Pb-free,;
文件頁數: 3/16頁
文件大?。?/td> 98K
代理商: CBTV4020EE
CBTV4020_3
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 03 — 4 April 2008
11 of 16
NXP Semiconductors
CBTV4020
20-bit DDR SDRAM 2 : 1 MUX
14. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
14.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
14.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
14.3 Wave soldering
Key characteristics in wave soldering are:
Process issues, such as application of adhesive and ux, clinching of leads, board
transport, the solder wave parameters, and the time during which components are
exposed to the wave
Solder bath specications, including temperature and impurities
相關PDF資料
PDF描述
CBTW28DD14ET 14-bit bus switch-multiplexer for DDR2-DDR3 applications
CLRD701 CLRD701 PEGODA Contactless smart card reader
CLRM701 CLRM701 MIFARE and ICODE contactless reader module
CSTLA4M00G55-A0 CERAMIC RESONATOR, 4 MHz
CSTLA8M00T55-B0 CERAMIC RESONATOR, 8 MHz
相關代理商/技術參數
參數描述
CBTV4020EE,518 功能描述:開關 IC - 各種 20-BIT DDR SDRAM 2 : 1 MUX RoHS:否 制造商:Fairchild Semiconductor 開啟電阻(最大值): 電源電壓-最大:4.4 V 電源電壓-最小:2.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:WLCSP-9 封裝:Reel
CBTV4020EE,551 功能描述:開關 IC - 各種 20-BIT DDR SDRAM 2 : 1 MUX RoHS:否 制造商:Fairchild Semiconductor 開啟電阻(最大值): 電源電壓-最大:4.4 V 電源電壓-最小:2.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:WLCSP-9 封裝:Reel
CBTV4020EE,557 功能描述:開關 IC - 各種 20-BIT DDR SDRAM 2 : 1 MUX RoHS:否 制造商:Fairchild Semiconductor 開啟電阻(最大值): 電源電壓-最大:4.4 V 電源電壓-最小:2.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:WLCSP-9 封裝:Reel
CBTV4020EE/G,118 功能描述:多路器開關 IC 20-BIT DDR SDRAM RoHS:否 制造商:Texas Instruments 通道數量:1 開關數量:4 開啟電阻(最大值):7 Ohms 開啟時間(最大值): 關閉時間(最大值): 傳播延遲時間:0.25 ns 工作電源電壓:2.3 V to 3.6 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UQFN-16
CBTV4020EE/G-T 功能描述:編碼器、解碼器、復用器和解復用器 20-BIT DDR SDRAM 2 : 1 MUX RoHS:否 制造商:Micrel 產品:Multiplexers 邏輯系列:CMOS 位數: 線路數量(輸入/輸出):2 / 12 傳播延遲時間:350 ps, 400 ps 電源電壓-最大:2.625 V, 3.6 V 電源電壓-最小:2.375 V, 3 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-44 封裝:Tray