
Datasheet
21
Electrical Specifications
3.8
Maximum Ratings
Table 3-3 lists the processor’s maximum environmental stress ratings. The processor should not
receive a clock while subjected to these conditions. Functional operating parameters are listed in
the AC and DC tables. Extended exposure to the maximum ratings may affect device reliability.
Furthermore, although the processor contains protective circuitry to resist damage from electro
static discharge (ESD), one should always take precautions to avoid high static voltages or electric
fields.
NOTES:
1. This rating applies to any processor pin.
2. Contact Intel for storage requirements in excess of one year.
3.9
Processor DC Specifications
The processor DC specifications in this section are defined at the processor core (pads) unless
noted otherwise. See
Table 4-3 for the pin signal definitions and signal pin assignments. The DC
Table 3-4 through
Table 3-25 list the DC specifications for the Pentium M processor and are valid
only while meeting specifications for junction temperature, clock frequency, and input voltages.
The Highest Frequency mode (HFM) and Lowest Frequency mode (LFM) refer to the highest and
lowest core operating frequencies supported on the processor. Active mode load line specifications
apply in all states except in the Deep Sleep and Deeper Sleep states. VCC,BOOT is the default
voltage driven by the voltage regulator at power up in order to set the VID values. Unless specified
otherwise, all specifications for the Pentium M processor are at Tjunction = 100° C. Care should be
taken to read all notes associated with each parameter.
Table 3-3. Processor DC Absolute Maximum Ratings
Symbol
Parameter
Min
Max
Unit
Notes
TSTORAGE
Processor storage
temperature
-40
85
°C
2
VCC
Any processor supply
voltage with respect to VSS
-0.3
1.6
V
1
VinAGTL+
AGTL+ buffer DC input
voltage with respect to V
SS
-0.1
1.6
V
1, 2
VinAsynch_CMOS CMOS buffer DC input
voltage with respect to V
SS
-0.1
1.6
V
1, 2