- 您現在的位置：買賣IC網 > PDF目錄10821 > BU2099FV-E2 (Rohm Semiconductor)IC DRV 12BIT SER/PAR I/O SSOPB20 PDF資料下載
參數資料
| 型號： | BU2099FV-E2 |
| 廠商： | Rohm Semiconductor |
| 文件頁數： | 18/18頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC DRV 12BIT SER/PAR I/O SSOPB20 |
| 標準包裝： | 1 |
| 類型： | 驅動器 |
| 驅動器/接收器數： | 12/0 |
| 電源電壓： | 2.7 V ~ 5.5 V |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 20-LSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 20-SSOP-B |
| 包裝： | 標準包裝 |
| 產品目錄頁面： | 1376 (CN2011-ZH PDF) |
| 其它名稱： | BU2099FV-E2DKR |
BU2050F,BU2092F,BU2092FV,BU2099FV,BD7851FP,BU2152FS
Technical Note
9/24
www.rohm.com
2009.06 - Rev.A
2009 ROHM Co., Ltd. All rights reserved.
【BU2092F/BU2092FV】
●Pin descriptions
●Timing chart
Fig. 4
1.
After the power is turned on and the voltage is stabilized, LCK should be activated, after clocking 12 data bits into
the DATA terminal.
2.
Qx parallel output data of the shift register is set after the 12
th clock by the LCK.
3.
Since the LCK is a label latch, data is retained in the “L” section and renewed in the “H” section of the LCK.
4.
Data retained in the internal latch circuit is output when the OE is in the “L” section.
［Truth Table］
Input
Function
CLOCK
DATA
LCK
OE
×
H
Output (Q0～Q11) Disable
×
L
Output (Q0～Q11) Enable
L
×
Store “L” in the first stage data of shift register, the previous stage data in the
others. (The conditions of storage register and output have no change.)
H
×
Store “H” in the first stage data of shift register, the previous stage data in the
others. (The conditions of storage register and output have no change.)
×
The data of shift register has no change.
×
The data of shift register is transferred to the storage register.
×
The data of storage register has no change.
Pin No.
Pin Name
I/O
Function
1
VSS
-
GND
2
DATA
I
Serial Data Input
3
CLOCK
I
Shift clock of DATA (Rising Edge Trigger)
4
LCK
I
Latch clock of DATA (Rising Edge Trigger)
5～11,
14～18
Q0～Q11
O
Parallel Data Output (Nch Open Drain FET)
Latch Data
L
H
Output FET
ON
OFF
12, 13
N.C.
-
Non connected
17
OE
I
Output Enable (“H” level : output FET is OFF)
18
VDD
-
Power Supply
CLOCK
LCK
DATA
DATA11
DATA10
DATA9
DATA1
DATA0
OE
Qx
Previous DATA
DATA11～0
“H”
Note) Diagram shows a status where a pull-up resistor is connected to output.
相關PDF資料 |
PDF描述 |
|---|---|
| MX7225LEWG+ | IC DAC 8BIT W/AMP 24-SOIC |
| MCP6541T-E/OT | IC COMP 1.6V SNGL P-P SOT23-5 |
| MAX525ACPP+ | IC DAC 12BIT QUAD LP 20-DIP |
| MAX526DEWG+T | IC DAC 12BIT QUAD CALIB 24-SOIC |
| VI-23L-MX | CONVERTER MOD DC/DC 28V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU-20OZ | 制造商:On-Shore Technology Inc 功能描述:20 PIN DIP SOCKET THRU HOLE |
| BU20TD2WNVX | 制造商:ROHM 制造商全稱:Rohm 功能描述:1ch 200mA CMOS LDO Regulators |
| BU20TD2WNVX-TL | 功能描述:Linear Voltage Regulator IC Positive Fixed 1 Output 2V 200mA SSON004X1010 制造商:rohm semiconductor 系列:- 包裝:剪切帶（CT） 零件狀態:有效 穩壓器拓?fù)?正，固定式 電壓 - 輸出:2V 電流 - 輸出:200mA 電壓 - 跌落（典型值）:0.38V @ 200mA 穩壓器數:1 電壓 - 輸入:最高 6V 電流 - 限制（最小值）:220mA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:4-UDFN 裸露焊盤 供應商器件封裝:SSON004X1010 標準包裝:1 |
| BU20TD3WG-GTR | 制造商:ROHM 制造商全稱:Rohm 功能描述:Versatile Package FULL CMOS LDO Regulator |
| BU20TD3WG-TR | 制造商:ROHM Semiconductor 功能描述:STANDARD CMOS VREG, 2.0V, SSOP PKG - Tape and Reel 制造商:ROHM Semiconductor 功能描述:IC REG LDO 2V 0.2A 5SSOP 制造商:ROHM Semiconductor 功能描述:LDO 制造商:ROHM Semiconductor 功能描述:LDO FIXED 2V 0.2A SSOP-5 制造商:ROHM Semiconductor 功能描述:LDO, FIXED, 2V, 0.2A, SSOP-5 制造商:ROHM Semiconductor 功能描述:LDO, FIXED, 2V, 0.2A, SSOP-5, Primary Input Voltage:6V, Output Voltage Fixed:2V, |
發布緊急采購，3分鐘左右您將得到回復。