- 您現在的位置：買賣IC網 > PDF目錄10821 > BU2099FV-E2 (Rohm Semiconductor)IC DRV 12BIT SER/PAR I/O SSOPB20 PDF資料下載
參數資料
| 型號： | BU2099FV-E2 |
| 廠商： | Rohm Semiconductor |
| 文件頁數： | 16/18頁 |
| 文件大小： | 0K |
| 描述： | IC DRV 12BIT SER/PAR I/O SSOPB20 |
| 標準包裝： | 1 |
| 類型： | 驅動器 |
| 驅動器/接收器數： | 12/0 |
| 電源電壓： | 2.7 V ~ 5.5 V |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 20-LSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 20-SSOP-B |
| 包裝： | 標準包裝 |
| 產品目錄頁面： | 1376 (CN2011-ZH PDF) |
| 其它名稱： | BU2099FV-E2DKR |
BU2050F,BU2092F,BU2092FV,BU2099FV,BD7851FP,BU2152FS
Technical Note
7/24
www.rohm.com
2009.06 - Rev.A
2009 ROHM Co., Ltd. All rights reserved.
【BU2050F】
●Pin descriptions
Pin No.
Pin Name
Function
1
P3
Parallel Data Output
2
P4
3
P5
4
VSS
GND
5
P6
Parallel Data Output
6
P7
7
P8
8
DATA
Serial Data Input
9
CLK
Clock Signal Input
10
STB
Strobe Signal Input
In case of “L”, the data of shift register outputs.
In case of “H”, all parallel outputs and data of latch circuit do not change.
11
CLR
Reset Signal Input
In case of “L”, the data of latch circuit reset, and all parallel output (P1～P8) can be L.
Normally CLR=H
12
P1
Parallel Data output
13
P2
14
VDD
Power Supply
●Timing chart
Fig. 2
1. After the power is turned on and the voltage is stabilized, STB should be activated, after clocking 8 data bits into the
DATA pin.
2. Pn parallel output data of the shift register is set after the 8
th clock by the STB.
3. Since the STB is level latch, data is retained in the “L” section and renewed in the “H” section of the STB.
［Function explanation］
·
A latch circuit has the reset function, which is common in all bits. In case of CLR terminal is “L”, the latch
circuit is reset non-synchronously without the other input condition, and all parallel output can be “L”.
·
A serial data inputted from DATA terminal is read in shift register with synchronized rising of clock.
In case of STB is “L” (CLR is ”H”), transmit the data which read in the shift register to latch circuit, and
outputs from the parallel data output terminal (P1～P8).
In case of STB is “H”, all parallel outputs and the data of latch do not change.
CLK
STB
DATA
DATA8
DATA7
DATA6
DATA2
DATA1
Pn
Previous DATA
DATA
CLR
“L”
相關PDF資料 |
PDF描述 |
|---|---|
| MX7225LEWG+ | IC DAC 8BIT W/AMP 24-SOIC |
| MCP6541T-E/OT | IC COMP 1.6V SNGL P-P SOT23-5 |
| MAX525ACPP+ | IC DAC 12BIT QUAD LP 20-DIP |
| MAX526DEWG+T | IC DAC 12BIT QUAD CALIB 24-SOIC |
| VI-23L-MX | CONVERTER MOD DC/DC 28V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU-20OZ | 制造商:On-Shore Technology Inc 功能描述:20 PIN DIP SOCKET THRU HOLE |
| BU20TD2WNVX | 制造商:ROHM 制造商全稱:Rohm 功能描述:1ch 200mA CMOS LDO Regulators |
| BU20TD2WNVX-TL | 功能描述:Linear Voltage Regulator IC Positive Fixed 1 Output 2V 200mA SSON004X1010 制造商:rohm semiconductor 系列:- 包裝:剪切帶（CT） 零件狀態:有效 穩壓器拓?fù)?正，固定式 電壓 - 輸出:2V 電流 - 輸出:200mA 電壓 - 跌落（典型值）:0.38V @ 200mA 穩壓器數:1 電壓 - 輸入:最高 6V 電流 - 限制（最小值）:220mA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:4-UDFN 裸露焊盤 供應商器件封裝:SSON004X1010 標準包裝:1 |
| BU20TD3WG-GTR | 制造商:ROHM 制造商全稱:Rohm 功能描述:Versatile Package FULL CMOS LDO Regulator |
| BU20TD3WG-TR | 制造商:ROHM Semiconductor 功能描述:STANDARD CMOS VREG, 2.0V, SSOP PKG - Tape and Reel 制造商:ROHM Semiconductor 功能描述:IC REG LDO 2V 0.2A 5SSOP 制造商:ROHM Semiconductor 功能描述:LDO 制造商:ROHM Semiconductor 功能描述:LDO FIXED 2V 0.2A SSOP-5 制造商:ROHM Semiconductor 功能描述:LDO, FIXED, 2V, 0.2A, SSOP-5 制造商:ROHM Semiconductor 功能描述:LDO, FIXED, 2V, 0.2A, SSOP-5, Primary Input Voltage:6V, Output Voltage Fixed:2V, |
發布緊急采購，3分鐘左右您將得到回復。