• <label id="txpqp"><td id="txpqp"></td></label>
  • <thead id="txpqp"></thead><code id="txpqp"><dfn id="txpqp"><table id="txpqp"></table></dfn></code>
    參數資料
    型號: BU-61864G3-432
    廠商: DATA DEVICE CORP
    元件分類: 微控制器/微處理器
    英文描述: 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    封裝: 25.40 X 25.40 MM, 2.54 MM HEIGHT, CERAMIC, QFP-72
    文件頁數: 36/60頁
    文件大?。?/td> 457K
    代理商: BU-61864G3-432
    41
    Data Device Corporation
    www.ddc-web.com
    BU-6174X/6184X/6186X
    F-10/02-300
    TRANSFORMERS
    In selecting isolation transformers to be used with the Enhanced
    Mini-ACE/-ACE, there is a limitation on the maximum amount of
    leakage inductance. If this limit is exceeded, the transmitter rise
    and fall times may increase, possibly causing the bus amplitude
    to fall below the minimum level required by MIL-STD-1553. In
    addition, an excessive leakage imbalance may result in a trans-
    former dynamic offset that exceeds 1553 specifications.
    The maximum allowable leakage inductance is 6.0 H, and
    is measured as follows:
    The side of the transformer that connects to the Enhanced
    Mini-ACE/-ACE is defined as the “primary” winding. If one side
    of the primary is shorted to the primary center-tap, the induc-
    tance should be measured across the “secondary” (stub side)
    winding. This inductance must be less than 6.0 H. Similarly, if
    the other side of the primary is shorted to the primary center-tap,
    the inductance measured across the “secondary” (stub side)
    winding must also be less than 6.0 H.
    The difference between these two measurements is the
    “differential” leakage inductance. This value must be less than
    1.0 H.
    Beta Transformer Technology Corporation (BTTC), a subsidiary
    of DDC, manufactures transformers in a variety of mechanical
    configurations with the required turns ratios of 1:2.5 direct cou-
    pled, and 1:1.79 transformer coupled. TABLE 46 provides a list-
    ing of many of these transformers.
    For further information, contact BTTC at 631-244-7393 or at
    www.bttc-beta.com.
    DLP-7014
    SLP-8007
    SLP-8024
    NOT RECOMMENDED
    LPB-5015
    B-3310
    HLP-6015
    Dual epoxy transformer, side by side, surface mount, 0.930" X 0.630", 0.155" max height
    DLP-7115 (see note 3)
    Dual epoxy transformer, side by side, surface mount, 1.410" X 0.750", 0.130" max height
    Single metal transformer, hermetically sealed, surface mount, 0.630" X 0.630", 0.175" max height
    B-3261
    HLP-6014
    Dual epoxy transformer, side by side, flat pack, 0.930" X 0.630", 0.155" max height
    Single metal transformer, hermetically sealed, flat pack, 0.630" X 0.630", 0.175" max height
    B-3300
    Dual epoxy transformer, side by side, through-hole, 0.930" X 0.630", 0.155" max height
    TST-9027
    Dual epoxy transformer, twin stacked, flat pack, 0.625" X 0.625", 0.280" max height
    TST-9017
    Dual epoxy transformer, twin stacked, surface mount, 0.625" X 0.625", 0.280" max height
    TST-9007
    Dual epoxy transformer, twin stacked, 0.625" X 0.625", 0.280" max height
    B-3819
    LPB-5014
    Single epoxy transformer, surface mount, hi-temp solder, 0.625" X 0.625", 0.220" max height.
    May be used with BU-6XXXXX4 versions of the Enhanced Mini-ACE
    Single epoxy transformer, flat pack, 0.625" X 0.625", 0.150" max height
    B-3227
    Single epoxy transformer, surface mount, 0.625" X 0.625", 0.275" max height
    B-3231
    Single epoxy transformer, flat pack, 0.625" X 0.625", 0.275" max height
    B-3818
    B-3067
    B-3226
    Single epoxy transformer, through-hole, 0.625" X 0.625", 0.220" max height.
    May be used with BU-6XXXXX4 versions of the Enhanced Mini-ACE.
    Single epoxy transformer, through-hole, 0.625" X 0.625", 0.250" max height
    BTTC PART NO.
    TRANSFORMER CONFIGURATION
    Single epoxy transformer, surface mount, 0.625" X 0.625", 0.150" max height
    B-3229
    Single epoxy transformer, through hole, transformer coupled only, 0.500" X 0.350", 0.250" max height
    TABLE 46. BTTC TRANSFORMERS FOR USE WITH ENHANCED MINI-ACE
    Notes:
    1. For the BU-6XXXXX4 versions of the Enhanced Mini-ACE, which include the McAir-compatible transceivers, only the B-3818 or B-3819 transformers (shown in bold
    in the table) may be used.
    2. For the BU-6XXXXX3 versions of the Enhanced Mini-ACE/-ACE with -1553B transceivers, any of the transformers listed in the table may be used.
    3. DLP-7115 operates to +105°C max. All other transformers listed operate to +130°C max.
    相關PDF資料
    PDF描述
    BU-61864G3-440Y 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    BU-61864G3-442K 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    BU-61864G3-442S 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    BU-61864G3-442W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    BU-61864G3-450K 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72
    相關代理商/技術參數
    參數描述
    BU-61864G4-100 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC
    BU-61864G4-110 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC
    BU-61864G4-200 制造商:DDC 功能描述:MIL-STD-1553/ARINC BUS CONTROLLER/RTU, 72 Pin, QFP
    BU-61865 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553 Components |Enhanced Mini-ACE?
    BU-61865F3-100 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC