參數資料
型號： AT45DB011D_07
廠商： Atmel Corp.
英文描述： 1-megabit 2.7-volt DataFlash
中文描述： 1兆位2.7伏的DataFlash
文件頁數： 24/52頁
文件大小： 1107K
代理商： AT45DB011D_07
24
3639B–DFLASH–02/07
AT45DB011D [Preliminary]
12. Deep Power-down
After initial power-up, the device will default in standby mode. The Deep Power-down command
allows the device to enter into the lowest power consumption mode. To enter the Deep Power-
down mode, the CS pin must first be asserted. Once the CS pin has been asserted, an opcode
of B9H command must be clocked in via input pin (SI). After the last bit of the command has
been clocked in, the CS pin must be de-asserted to initiate the Deep Power-down operation.
After the CS pin is de-asserted, the will device enter the Deep Power-down mode within the
maximum t
EDPD
time. Once the device has entered the Deep Power-down mode, all instructions
are ignored except for the Resume from Deep Power-down command.
Figure 12-1.
Deep Power-down
12.1
Resume from Deep Power-down
The Resume from Deep Power-down command takes the device out of the Deep Power-down
mode and returns it to the normal standby mode. To Resume from Deep Power-down mode, the
CS pin must first be asserted and an opcode of ABH command must be clocked in via input pin
(SI). After the last bit of the command has been clocked in, the CS pin must be de-asserted to
terminate the Deep Power-down mode. After the CS pin is de-asserted, the device will return to
the normal standby mode within the maximum t
RDPD
time. The CS pin must remain high during
the t
RDPD
time before the device can receive any commands. After resuming form Deep Power-
down, the device will return to the normal standby mode.
Figure 12-2.
Resume from Deep Power-Down
Command
Opcode
Deep Power-down
B9H
Opcode
CS
Each transition
represents
8
b
its
SI
Command
Opcode
Resume from Deep Power-down
ABH
Opcode
CS
Each transition
represents
8
b
its
SI
相關PDF資料
PDF描述
AT45DB011D-MU 1-megabit 2.7-volt DataFlash
AT45DB011D-SSU 1-megabit 2.7-volt DataFlash
AT45DB011D-SU 1-megabit 2.7-volt DataFlash
AT45DB011 1-megabit 2.7-volt Only Serial DataFlash(1M位 2.7V串行數據閃速存儲器)
AT45DB021B-CU 2-megabit 2.7-volt Only DataFlash
相關代理商/技術參數
參數描述
AT45DB011D-DWF 制造商:Adesto Technologies Corporation 功能描述:1M DATAFLASH, 8-UDFN,IND,GRN,NIPDAU - 1MB, DATAFLASH, WAFER, - Gel-pak, waffle pack, wafer, diced wafer on film 制造商:Adesto Technologies Corporation 功能描述:DIE/WAFER FLASH 1MBIT 66MHZ
AT45DB011D-MH SL954 制造商:Adesto Technologies Corporation 功能描述:IC FLASH 1MBIT 66MHZ 8UDFN
AT45DB011D-MH-SL954 制造商:Adesto Technologies Corporation 功能描述:8-UDFN (5X6), IND TEMP, 2.7V, TRAY, 256 BYTE PAGE - Trays 制造商:Adesto Technologies Corporation 功能描述:Flash 1M, 66MHz, 2.7-3.6V DataFlash
AT45DB011D-MH-SL955 制造商:Adesto Technologies Corporation 功能描述:8-UDFN (5X6), IND TEMP, 2.7V, T&R, 256 BYTE PAGE - Tape and Reel 制造商:Adesto Technologies Corporation 功能描述:IC FLASH 1MBIT 66MHZ 8UDFN 制造商:Adesto Technologies Corporation 功能描述:Flash 1M, 66MHz 2.7-3.6V DataFlash
AT45DB011D-MH-T 功能描述:閃存 1M 2.7-3.6V, 66Mhz Serial 閃存 RoHS:否 制造商:ON Semiconductor 數據總線寬度:1 bit 存儲類型:Flash 存儲容量:2 MB 結構:256 K x 8 定時類型: 接口類型:SPI 訪問時間: 電源電壓-最大:3.6 V 電源電壓-最小:2.3 V 最大工作電流:15 mA 工作溫度:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*