參數資料
型號： AT43USB325E-AC
廠商： ATMEL CORP
元件分類： 微控制器/微處理器
英文描述： Multimedia USB Keyboard Controller with Embedded Hub
中文描述： 8-BIT, 12 MHz, RISC MICROCONTROLLER, PQFP64
封裝： 1.40 MM HEIGHT, PLASTIC, MS-026-ACB, LQFP-64
文件頁數： 89/109頁
文件大?。?/td> 643K
代理商： AT43USB325E-AC
89
3355C–USB–4/05
AT43USB325
1 = Reset complete
This bit is set by the USB hardware after it completes RESET signaling which is initiated when
the Reset and Enable Port command is detected at the Port Control Register, HPCON. The firm-
ware sends this command when it decodes a SetPortFeature(PORT_RESET) request from the
host.
At EOF2 after the hardware completes the port reset, the hardware sets the Port Enable Status
bit and clears the Port Reset Status bit of the Hub Port Status Register, HPSTAT. Cleared by
firmware, ClearPortFeature(PORT_RESET).
Bit 3 – POCIC: Port Overcurrent Indicator Change
0 = No change has occurred on Overcurrent Indicator
1 = Overcurrent Indicator has changed
This bit is relevant to hubs with individual overcurrent reporting only. The firmware sets this bit
as a result of detecting overcurrent at the ports OVC# pin. The firmware clears bit through Clear-
PortFeature(PORT_OVER_CURRENT). For Port 1, this bit is always cleared.
Bit 2 – PSSC: Port Suspend Status Change
0 = No change
1 = Resume completed
Port 2, 3 set by hardware upon completion of firmware initiated resume process. Port 1 set by
firmware 20 ms after the next EOF2 after completion of resume process. RESUME signaling is
initiated through global resume, selective resume and remote wakeup. Cleared by firmware via
host request ClearPortFeature(PORT_SUSPEND).
Bit 1 – PESC: Port Enable/Disable Status Change
0 = No change has occurred on Port Enable/Disable Status
1 = Port Enable/Disable status has changed
Set by hardware due to babble, physical disconnect or overcurrent except for Port 1 in which
case it is set by hardware at EOF2 due to hardware events. Cleared by firmware via Host
request ClearPortFeature(PORT_ENABLE).
Bit 0 – PCSC: Port Connect Status Change
0 = No change has occurred on Current Connect Status
1 = Current Connect Status has changed
This bit is set by hardware at EOF2 after it detects a connect or disconnect at a port, except for
Port 1. Hardware sets this bit for Port 5 after a hub reset. Cleared by firmware via Host request
ClearPortFeature(PORT_CONNECTION).
相關PDF資料
PDF描述
AT43USB325E-AU Multimedia USB Keyboard Controller with Embedded Hub
AT43USB326-AC Multimedia USB Keyboard Controller with Embedded Hub
AT43USB326-AU Multimedia USB Keyboard Controller with Embedded Hub
AT43USB351M-AC Full-speed/Low-speed USB Microcontroller with ADC and PWM
AT43USB353M-AC Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
相關代理商/技術參數
參數描述
AT43USB325E-AU 功能描述:USB 接口集成電路 USB KEYBOARD CONTROL w/HUB - IND TEMP RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
AT43USB326 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Missed Watchdog Timer Reset
AT43USB326_06 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Multimedia USB Keyboard Controller with Embedded Hub
AT43USB326-AC 功能描述:USB 接口集成電路 USB KEYBOARD F/LOGI- TECH - COM TEMP RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
AT43USB326-AU 功能描述:USB 接口集成電路 USB KEYBOARD FOR LOGITECH - IND TEMP RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*