- 您現在的位置：買賣IC網 > PDF目錄375327 > AN8028 (PANASONIC CORP) Self-excited RCC pseudo-resonance type AC-DC switching power supply control IC PDF資料下載
參數資料
| 型號： | AN8028 |
| 廠商： | PANASONIC CORP |
| 元件分類： | 穩壓器 |
| 英文描述： | Self-excited RCC pseudo-resonance type AC-DC switching power supply control IC |
| 中文描述： | 1 A SWITCHING CONTROLLER, PSIP9 |
| 封裝： | PLASTIC, SIP-9 |
| 文件頁數： | 12/13頁 |
| 文件大小： | 133K |
| 代理商： | AN8028 |
12
AN8028
Voltage Regulators
I
Application Notes (continued)
[2] Design reference data
How to start the soft start function by external parts
The power supply rises under overload condition due to the capacitor connected to the power supply output.
In this condition, since the voltage of the power supply output is low, the normal constant voltage control attempts
to rise the power supply output at the maximum duty. The control uses the pulse-by-pulse overcurrent protection
(CLM), attempting to limit the current. However, the pulse can not be brought down to zero due to delay of filter,
etc. As a result, a large current flows into the main switch (the power MOSFET) or the diode in the secondary
side, and in the worst case these parts are damaged. For this reason, the soft start function is used to suppress the
rush current at start of the power supply.
As shown in figure 12, the R3 and C4 are connected
between the FB terminal (pin 9) and the GND terminal (pin
5) to use the soft start function. When the supply voltage of
the IC reaches the start voltage and the start circuit begins
operation, the open bias is outputted to the FB terminal.
By this voltage, the charge current flows in the C4 to
become flowing-out current of the FB terminal (I
FB
), and out-
put control begins under the condition in which T
ON
period is
short. The I
FB
decreases with elapse of time, since it changes
proportionally to the charge current of the C4. The CLM
circuit operates, depending on the sum of the R7 end-to-end
voltage by the current which flows in the power MOSFET at
power-on and the R6 end-to-end voltage by the charge current
of the C4.
Therefore, since the current which flows in the power
MOSFET at power-on gradually increases, the rush current
can be suppressed.
GND
Start resistor
R1
V
CC
FB
V
OUT
Figure 12
C8
C4
R8
C6
R3
R7
CLM
To AC (
)
相關PDF資料 |
PDF描述 |
|---|---|
| AN8029 | Self-excited RCC pseudo-resonance type AC-DC switching power supply control IC |
| AN8031 | Active filter control IC |
| AN8032 | Active filter control IC |
| AN8038S | AC-DC switching power supply control IC with RCC local resonance circuit for improved conformance with energy conservation laws |
| AN8041S | Liquid crystal backlight control IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AN8029 | 制造商:Panasonic Industrial Company 功能描述:IC PANASONIC |
| AN8031 | 制造商:PANASONIC 制造商全稱:Panasonic Semiconductor 功能描述:Active filter control IC |
| AN8031-6-080 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| AN8031AH | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller |
| AN8032 | 制造商:PANASONIC 制造商全稱:Panasonic Semiconductor 功能描述:Active filter control IC |
發布緊急采購，3分鐘左右您將得到回復。