Preliminary Data Sheet
October 2004
AGR09045GUM
45 W, 865 MHz—895 MHz, N-Channel E-Mode, Lateral MOSFET
Introduction
The AGR09045GUM is a high-voltage, gold-metal-
ized, laterally diffused metal oxide semiconductor
(LDMOS) RF power transistor suitable for cellular
band, code-division multiple access (CDMA), global
system for mobile communication (GSM), enhanced
data for global evolution (EDGE), and time-division
multiple access (TDMA) single and multicarrier class
AB wireless base station amplifier applications. This
device is manufactured on an advanced LDMOS
technology, offering state-of-the-art performance and
reliability. Available in a plastic overmold package
capable of delivering a minimum output power of
45 W, it is ideally suited for today's RF power ampli-
fier applications.
AGR09045GUM
Figure 1. Available Package
Features
■
Typical performance ratings are for IS-95 CDMA,
pilot, sync, paging, traffic codes 8—13:
— Output power (POUT): 10 W.
— Power gain: 18.25 dB.
— Efficiency: 27%.
— Adjacent channel power ratio (ACPR) for
30 kHz bandwidth (BW):
(750 kHz offset: –47 dBc)
(1.98 MHz offset: –62 dBc).
— Input return loss: –10 dB.
■
High-reliability, gold-metalization process.
■
High gain, efficiency, and linearity.
■
Integrated ESD protection.
■
Si LDMOS.
■
Industry-standard packages.
■
45 W minimum output power.
Table 1. Thermal Characteristics
Table 2. Absolute Maximum Ratings*
* Stresses in excess of the absolute maximum ratings can cause
permanent damage to the device. These are absolute stress rat-
ings only. Functional operation of the device is not implied at
these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute
maximum ratings for extended periods can adversely affect
device reliability.
Table 3. ESD Rating*
* Although electrostatic discharge (ESD) protection circuitry has
been designed into this device, proper precautions must be
taken to avoid exposure to ESD and electrical overstress (EOS)
during all handling, assembly, and test operations. Agere
employs a human-body model (HBM), a machine model (MM),
and a charged-device model (CDM) qualification requirement in
order to determine ESD-susceptibility limits and protection
design evaluation. ESD voltage thresholds are dependent on the
circuit parameters used in each of the models, as defined by
JEDEC's JESD22-A114B (HBM), JESD22-A115A (MM), and
JESD22-C101A (CDM) standards.
Caution: MOS devices are susceptible to damage from elec-
trostatic charge. Reasonable precautions in han-
dling and packaging MOS devices should be
observed.
Parameter
Sym
Value
Unit
Thermal Resistance,
Junction to Case
R
θJC
1.4
°C/W
Parameter
Sym
Value
Unit
Drain-source Voltage
VDSS
65
Vdc
Gate-source Voltage
VGS
–0.5, +15
Vdc
Total Dissipation
at TC = 25 °C
PD
125
W
Derate Above 25
°C—
0.71
W/°C
Operating Junction
Temperature
TJ
200
°C
Storage Temperature
Range
TSTG –65, +150
°C
Minimum (V)
Class
HBM
500
1B
MM
50
A
CDM
1500
4