參數資料
型號: AFBR-5803TZ
元件分類: 光收發
英文描述: FIBER OPTIC TRANSCEIVER, 1270-1380nm, 125Mbps(Tx), 125Mbps(Rx), THROUGH HOLE MOUNT, ST CONNECTOR
封裝: ROHS COMPLIANT, SIP-9
文件頁數: 14/16頁
文件大?。?/td> 489K
代理商: AFBR-5803TZ
Figure 8. Recommended Board Layout Hole Pattern
Solder and Wash Process Compatibility
The transceivers are delivered with protective process
plugs inserted into the duplex SC or duplex ST connector
receptacle. This process plug protects the optical subas-
semblies during wave solder and aqueous wash process-
ing and acts as a dust cover during shipping.
These transceivers are compatible with either industry
standard wave or hand solder processes.
Shipping Container
The transceiver is packaged in a shipping container
designed to protect it from mechanical and ESD damage
during shipment or storage.
Board Layout - Decoupling Circuit and Ground Planes
It is important to take care in the layout of your circuit
board to achieve optimum performance from these
transceivers. Figure 7 provides a good example of a
schematic for a power supply decoupling circuit that
works well with these parts. It is further recommended
that a contiguous ground plane be provided in the
circuit board directly under the transceiver to provide
a low inductance ground for signal return current. This
recommendation is in keeping with good high frequency
board layout practices.
Board Layout - Hole Pattern
The Avago Technologies transceiver complies with the
circuit board “Common Transceiver Footprint” hole
pattern defined in the original multisource announce-
ment which defined the 1 x 9 package style. This drawing
is reproduced in Figure 8 with the addition of ANSI
Y14.5M compliant dimensioning to be used as a guide in
the mechanical layout of your circuit board.
Board Layout - Mechanical
For applications providing a choice of either a duplex SC
or a duplex ST connector interface, while utilizing the
same pinout on the printed circuit board, the ST port
needs to protrude from the chassis panel a minimum
of 9.53 mm for sufficient clearance to install the ST
connector.
Please refer to Figure 8a for a mechanical layout detailing
the recommended location of the duplex SC and duplex
ST transceiver packages in relation to the chassis panel.
20.32
(0.800)
TOP VIEW
2 x 1.9 ± 0.1
(0.075 ± 0.004)
20.32
(0.800)
2.54
(0.100)
9 x 0.8 ± 0.1
(0.032 ± 0.004)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
相關PDF資料
PDF描述
AFBR-5903EZ FIBER OPTIC TRANSCEIVER, 1270-1380nm, 125Mbps(Tx), 125Mbps(Rx), BOARD/PANEL MOUNT, MT-RJ CONNECTOR
AFBR-5903Z FIBER OPTIC TRANSCEIVER, 1270-1380nm, 125Mbps(Tx), 125Mbps(Rx), BOARD/PANEL MOUNT, MT-RJ CONNECTOR
AFBR-5930Z FIBER OPTIC TRANSCEIVER, 1280-1380nm, 200Mbps(Tx), 200Mbps(Rx), BOARD/PANEL MOUNT, MT-RJ CONNECTOR
AFBR-700SDZ FIBER OPTIC TRANSCEIVER, 840-860nm, 10000Mbps(Tx), 10000Mbps(Rx), PANEL MOUNT, LC CONNECTOR
AFBR-707SDZ FIBER OPTIC TRANSCEIVER, 1260-1355nm, 10000Mbps(Tx), 10000Mbps(Rx), SURFACE MOUNT, LC CONNECTOR
相關代理商/技術參數
參數描述
AFBR-5803Z 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-5805ATZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-5805AZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-5805TZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-5805Z 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: