參數資料
型號: ADRF6604ACPZ-R7
廠商: ANALOG DEVICES INC
元件分類: 混頻器
英文描述: 2500 MHz - 2900 MHz RF/MICROWAVE DOUBLE BALANCED MIXER
封裝: 6 X 6 MM, ROHS COMPLIANT, MO-220VJJD2, LFCSP_VQ, CP-40
文件頁數: 10/24頁
文件大?。?/td> 714K
代理商: ADRF6604ACPZ-R7
ADRF6604
Rev. 0 | Page 18 of
24
EVALUATION BOARD
Figure 24 shows the schematic of the RoHS-compliant evalu-
ation board for the ADRF6604. This board has four layers and
was designed using Rogers 4350 hybrid material to minimize
high frequency losses. FR4 material is also adequate if the design
can accept the slightly higher trace loss of this material.
The evaluation board is designed to operate using the internal
VCO of the device (the default configuration) or using an
external VCO. To use an external VCO, R62 and R12 should
be removed. Place 0 Ω resistors in R63 and R11. The input of
the external VCO should be connected to the VTUNE SMA
connector, and the external VCO output should be connected
to the LO IN/OUT SMA connector. In addition to these hard-
ware changes, internal register settings must also be changed to
enable operation with an external VCO (see the Register 6—
Additional configuration options for the evaluation board are
described in Table 10.
EVALUATION BOARD CONTROL SOFTWARE
Software to program the ADRF6604 is available for download
from the ADRF6604 product page at www.analog.com. To install
the software, download and extract the zip file. Then run the
ADRF6x0x_3p0p0_XP_install.exe installation file.
The evaluation board can be connected to the PC using a PC
parallel port or a USB port. These options are selectable from
the opening menu of the software interface (see Figure 22). The
evaluation board is shipped with a 25-pin parallel port cable
for connection to the PC parallel port.
To connect the evaluation board to a USB port, a USB adapter
board (Part No. EVAL-ADF4XXXZ-USB) must be purchased
from www.analog.com. This board connects to the PC using a
standard USB cable with a USB mini-connector at one end. An
additional 25-pin male to 9-pin female adapter is required to
mate the EVAL-ADF4XXXZ-USB board to the 9-pin D-Sub
connector on the ADRF6604 evaluation board.
0
85
53
-0
25
Figure 22. Control Software Opening Menu
Figure 23 shows the main window of the control software with
the default settings displayed.
相關PDF資料
PDF描述
ADRF6801ACPZ-R7 750 MHz - 1150 MHz RF/MICROWAVE I/Q DEMODULATOR
ADT14GS-REEL ANALOG TEMP SENSOR-VOLTAGE, 2.49-2.52V, 3Cel, RECTANGULAR, SURFACE MOUNT
ADT42GRT ANALOG TEMP SENSOR-VOLTAGE, 0.75V, 3Cel, RECTANGULAR, SURFACE MOUNT
ADT50GRT ANALOG TEMP SENSOR-VOLTAGE, 0.1-2V, 3Cel, RECTANGULAR, SURFACE MOUNT
ADT45GRT ANALOG TEMP SENSOR-VOLTAGE, 0.1-2V, 3Cel, RECTANGULAR, SURFACE MOUNT
相關代理商/技術參數
參數描述
ADRF6604-EVALZ 功能描述:EVAL KIT FOR ADRF6604 RoHS:是 類別:RF/IF 和 RFID >> RF 評估和開發套件,板 系列:- 標準包裝:1 系列:- 類型:GPS 接收器 頻率:1575MHz 適用于相關產品:- 已供物品:模塊 其它名稱:SER3796
ADRF6612ACPZ-R7 功能描述:IC MIXER 700-3000MHZ 48LFCSP 制造商:analog devices inc. 系列:- 包裝:剪切帶(CT) 零件狀態:在售 RF 類型:- 頻率:700MHz ~ 3GHz 增益:15dB 噪聲系數:10.7dB 輔助屬性:- 電流 - 電源:260mA 電壓 - 電源:3.5 V ~ 5.25 V 封裝/外殼:48-WFQFN 裸露焊盤 供應商器件封裝:48-LFCSP(7x7) 標準包裝:1
ADRF6612-EVALZ 功能描述:ADRF6612 EVAL BOARD 制造商:analog devices inc. 系列:- 零件狀態:有效 類型:混頻器 頻率:700MHz ~ 3GHz 配套使用產品/相關產品:ADRF6612 所含物品:板 標準包裝:1
ADRF6614ACPZ-R7 功能描述:RF Mixer IC GSM 700MHz ~ 3GHz 48-LFCSP (7x7) 制造商:analog devices inc. 系列:- 包裝:剪切帶(CT) 零件狀態:有效 RF 類型:GSM 頻率:700MHz ~ 3GHz 混頻器數:2 增益:9dB 噪聲系數:10.7dB 輔助屬性:- 電流 - 電源:260mA 電壓 - 電源:5V 封裝/外殼:48-WFQFN 裸露焊盤,CSP 供應商器件封裝:48-LFCSP(7x7) 標準包裝:1
ADRF6614-EVALZ 功能描述:EVAL BOARD FOR ADRF6614 制造商:analog devices inc. 系列:- 零件狀態:有效 類型:混頻器 頻率:700MHz ~ 3GHz 配套使用產品/相關產品:ADRF6614 所含物品:板 標準包裝:1