參數資料
型號： ADM1030ARQ
廠商： ANALOG DEVICES INC
元件分類： 溫度/濕度傳感器
英文描述： Intelligent Temperature Monitor and PWM Fan Controller
中文描述： DIGITAL TEMP SENSOR-SERIAL, 8BIT(s), 1Cel, RECTANGULAR, SURFACE MOUNT
封裝： MO-137AB, QSOP-16
文件頁數： 18/28頁
文件大?。?/td> 278K
代理商： ADM1030ARQ
REV. 0
ADM1030
–18–
Effect of ADC Sample Rate on Filtered Mode
The second means by which to change the Filtered Mode char-
acteristics is to adjust the ADC sample rate. The faster the ADC
sample rate, the more temperature samples are obtained per
second. One way to apply filtering to the control loop is to
slow down the ADC sampling rate. This means that the num-
ber of iterations of the Filtered Mode algorithm per second
are effectively reduced. If the number of temperature measure-
ments per second are reduced, how often the PWM_OUT
signal controlling the fan is updated is also reduced.
Bits <4:2> of the Fan Filter Register (Reg 0x23) set the ADC
sample rate. The default ADC sample rate is 1.4 kHz. The
ADC sample rate is selectable from 87.5 Hz to 11.2 kHz.
Table IX shows how many temperature samples are obtained
per second, for each of the ADC sample rates.
Table IX. Temperature Updates per Second
ADC Sample Rate
Temperature Updates/Sec
87.5 Hz
175 Hz
350 Hz
700 Hz
1.4 kHz
2.8 kHz
5.6 kHz
11.2 kHz
0.0625
0.125
0.25
0.5
1 (Default)
2
4
8
RELEVANT REGISTERS FOR FILTERED AUTOMATIC
FAN SPEED CONTROL MODE
In addition to the registers used to program the normal Auto-
matic Fan Speed Control Mode, the following register needs to
be programmed.
Register 0x23 Fan Filter Register
<7>
Spin-up Disable :- when this bit is set to 1, fan spin-up
is disabled. (Default = 0)
<6:5> Ramp Rate: these bits set the ramp rate for filtered mode.
00 = 1 (0.416% Duty Cycle Change)
01 = 2 (0.833% Duty Cycle Change)
10 = 4 (1.66% Duty Cycle Change)
11 = 8 (3.33% Duty Cycle Change)
<4:2> ADC Sample Rate
000 = 87.5 Hz
001 = 175 Hz
010 = 350 Hz
011 = 700 Hz
100 = 1.4 kHz (Default)
101 = 2.8 kHz
110 = 5.6 kHz
111 = 11.2 kHz
<1>
Unused. Default = 0
<0>
Fan 1 Filter Enable: when this bit is set to 1, it enables
filtering on Fan 1. Default = 0.
PROGRAMMING THE FILTERED AUTOMATIC FAN
SPEED CONTROL LOOP
1. Program a value for T
MIN
.
2. Program a value for the slope T
RANGE
.
3. T
MAX
= T
MIN
+ T
RANGE
.
4. Program a value for Fan Spin-up Time.
5. Program the desired Automatic Fan Speed Control Mode
Behavior, i.e., which temperature channel controls the fan.
6. Program a ramp rate for the filtered mode.
7. Program the ADC sample rate in the Fan Filter Register.
8. Set Bit 0 to enable fan filtered mode for the fan.
9. Select Automatic Fan Speed Control Mode by setting Bit 7 of
Configuration Register 1.
PWM DUTY CYCLE SELECT MODE
The ADM1030 may be operated under software control by clear-
ing Bit 7 of Configuration Register 1 (Register 0x00). This
allows the user to directly control PWM Duty Cycle.
Clearing Bit 5 of Configuration Register 1 allows fan control by
varying PWM duty cycle. Values of duty cycle between 0% to
100% may be written to the Fan Speed Config Register (0x22)
to control the speed of the fan. Table X shows the relationship
between hex values written to the Fan Speed Configuration
Register and PWM duty cycle obtained.
Table X. PWM Duty Cycle Select Mode
Hex Value
PWM Duty Cycle
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
0%
7%
14%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
相關PDF資料
PDF描述
ADM1030 Circular Connector; No. of Contacts:66; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:19; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:19-35
ADM1033 Thermal Monitor and Fan Speed (RPM) Controller
ADM1033ARQ Thermal Monitor and Fan Speed (RPM) Controller
ADM1033ARQ-REEL Thermal Monitor and Fan Speed (RPM) Controller
ADM1033ARQ-REEL7 Thermal Monitor and Fan Speed (RPM) Controller
相關代理商/技術參數
參數描述
ADM1030ARQ-REEL 功能描述:IC SNSR TEMP/FAN PWM CTRL 16QSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 熱管理 系列:- 標準包裝:1 系列:- 功能:溫度監控系統（傳感器） 傳感器類型:內部和外部 感應溫度:-40°C ~ 125°C，外部傳感器 精確度:±2.5°C 本地（最大值），±5°C 遠程（最大值） 拓?fù)?ADC，比較器，寄存器庫 輸出類型:2 線 SMBus? 輸出警報:無 輸出風扇:無 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 供應商設備封裝:SOT-23-8 包裝:Digi-Reel® 其它名稱:296-22675-6
ADM1030ARQ-REEL7 功能描述:IC SNSR TEMP/FAN PWM CTRL 16QSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 熱管理 系列:- 標準包裝:1 系列:- 功能:溫度監控系統（傳感器） 傳感器類型:內部和外部 感應溫度:-40°C ~ 125°C，外部傳感器 精確度:±2.5°C 本地（最大值），±5°C 遠程（最大值） 拓?fù)?ADC，比較器，寄存器庫 輸出類型:2 線 SMBus? 輸出警報:無 輸出風扇:無 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 供應商設備封裝:SOT-23-8 包裝:Digi-Reel® 其它名稱:296-22675-6
ADM1030ARQZ 功能描述:馬達/運動/點火控制器和驅動器 TDM & PWM FAN CNTRLRS IC RoHS:否 制造商:STMicroelectronics 產品:Stepper Motor Controllers / Drivers 類型:2 Phase Stepper Motor Driver 工作電源電壓:8 V to 45 V 電源電流:0.5 mA 工作溫度:- 25 C to + 125 C 安裝風格:SMD/SMT 封裝 / 箱體:HTSSOP-28 封裝:Tube
ADM1030ARQZ-REEL 功能描述:板上安裝溫度傳感器 TDM PWM FAN CTRLRS IC RoHS:否 制造商:Omron Electronics 輸出類型:Digital 配置: 準確性:+/- 1.5 C, +/- 3 C 溫度閾值: 數字輸出 - 總線接口:2-Wire, I2C, SMBus 電源電壓-最大:5.5 V 電源電壓-最小:4.5 V 最大工作溫度:+ 50 C 最小工作溫度:0 C 關閉: 安裝風格: 封裝 / 箱體: 設備功能:Temperature and Humidity Sensor
ADM1030ARQZ-REEL7 功能描述:IC SNSR TEMP/FAN PWM CTRL 16QSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 熱管理 系列:- 標準包裝:1 系列:- 功能:溫度監控系統（傳感器） 傳感器類型:內部和外部 感應溫度:-40°C ~ 125°C，外部傳感器 精確度:±2.5°C 本地（最大值），±5°C 遠程（最大值） 拓?fù)?ADC，比較器，寄存器庫 輸出類型:2 線 SMBus? 輸出警報:無 輸出風扇:無 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 供應商設備封裝:SOT-23-8 包裝:Digi-Reel® 其它名稱:296-22675-6
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*