參數資料
型號： AD9974BBCZ
廠商： Analog Devices Inc
文件頁數： 15/52頁
文件大?。?/td> 0K
描述： IC CCDSP DUAL 14BIT 100-CSPBGA
標準包裝： 1
類型： CCD 信號處理器，14 位
輸入類型： 邏輯
輸出類型： 邏輯
接口： 3 線串口
電流 - 電源： 55mA
安裝類型： 表面貼裝
封裝/外殼： 100-LFBGA，CSPBGA
供應商設備封裝： 100-CSBGA（9x9）
包裝： 托盤
AD9974
Rev. A | Page 22 of 52
HBLK Mode 1 Operation
Enable multiple repeats of the HBLK signal by setting
HBLK_MODE to 1. In this mode, the HBLK pattern can be
generated using a different set of registers: HBLKSTART,
HBLKEND, HBLKLEN, and HBLKREP, along with the six
toggle positions (see Figure 28).
Separate toggle positions are available for even and odd lines.
If alternation is not needed, load the same values into the registers
for even (HBLKTOGE) and odd (HBLKTOGO) lines.
Generating HBLK Line Alternation
HBLK Mode 0 and HBLK Mode 1 provide the ability to
alternate different HBLK toggle positions on even and odd
lines. Separate toggle positions are available for even and odd
lines. If even/odd line alternation is not required, load the same
values into the registers for even (HBLKTOGE) and odd
(HBLKTOGO) lines.
Increasing H-Clock Width During HBLK
HBLK Mode 0 and HBLK Mode 1 allow the H1 to H4 pulse
width to be increased during the HBLK interval. As shown in
Figure 29, the H-clock frequency can be reduced by a factor of
1/2, 1/4, 1/6, 1/8, 1/10, 1/12, and so on, up to 1/30. To enable this
feature, the HCLK_WIDTH register (Address 0x34[7:4]) is set to
a value between 1 and 15. When this register is set to 0, the wide
HCLK feature is disabled. The reduced frequency occurs only for
H1 to H4 pulses that are located within the HBLK area.
The HCLK_WIDTH register is generally used in conjunction
with special HBLK patterns to generate vertical and horizontal
mixing in the CCD.
Note that the wide HCLK feature is available only in HBLK Mode 0
and HBLK Mode 1, not in HBLK Mode 2.
Table 13. HCLK Width Register
Register
Length (Bits)
Description
HCLK_WIDTH
4
Controls H1 to H4 width during HBLK as a fraction of pixel rate.
0 = same frequency as pixel rate.
1 = 1/2 pixel frequency, that is, doubles the HCLK pulse width.
2 = 1/4 pixel frequency.
3 = 1/6 pixel frequency.
4 = 1/8 pixel frequency.
5 = 1/10 pixel frequency.
…
15 = 1/30 pixel frequency.
HBLK
H-BLANK REPEATING PATTERN IS CREATED USING HBLKLEN AND HBLKREP REGISTERS.
H1/H3
H2/H4
HBLKSTART HBLKTOGE1
HBLKTOGE2
HBLKEND
HBLKTOGE3
HBLKTOGE4
HBLKLEN
HBLKREP NUMBER 1
HBLKREP NUMBER 2
HBLKREP NUMBER 3
HBLKREP = 3
05
95
5-
02
8
Figure 28. HBLK Repeating Pattern Using HBLKMODE = 1
HBLK
H-CLOCK FREQUENCY CAN BE REDUCED DURING HBLK BY 1/2 (AS SHOWN),
1/4, 1/6, 1/8, 1/10, 1/12, AND SO ON, UP TO 1/30 USING HBLKWIDTH REGISTER.
H1/H3
H2/H4
1/FPIX
2 × (1/FPIX)
0
59
55
-02
9
Figure 29. Generating Wide H-Clock Pulses During HBLK Interval
相關PDF資料
PDF描述
AD9895KBCZ IC CCD SIGNAL PROC/GEN 64-CSPBGA
AD9849AKSTZ IC CCD SIGNAL PROC 12BIT 48LQFP
AD9847AKSTZ IC CCD SIGNAL PROC 10BIT 48-LQFP
AD9944KCPZ IC CCD SIGNAL PROCESSOR 32-LFCSP
3-221185-1 PLUG,75 OHM,COML BNC
相關代理商/技術參數
參數描述
AD9974BBCZRL 功能描述:IC CCDSP DUAL 14BIT 100-CSPBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 傳感器和探測器接口 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:74 系列:- 類型:觸控式傳感器 輸入類型:數字 輸出類型:數字 接口:JTAG，串行 電流 - 電源:100µA 安裝類型:表面貼裝 封裝/外殼:20-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:20-TSSOP 包裝:管件
AD9975 制造商:AD 制造商全稱:Analog Devices 功能描述:Broadband Modem Mixed-Signal Front End
AD9975ABST 制造商:AD 制造商全稱:Analog Devices 功能描述:Broadband Modem Mixed-Signal Front End
AD9975ABSTEB 制造商:AD 制造商全稱:Analog Devices 功能描述:Broadband Modem Mixed-Signal Front End
AD9975ABSTRL 制造商:AD 制造商全稱:Analog Devices 功能描述:Broadband Modem Mixed-Signal Front End
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*