tD = 6n" />
參數資料
型號: AD9786BSVZ
廠商: Analog Devices Inc
文件頁數: 21/56頁
文件大?。?/td> 0K
描述: IC DAC 16BIT INTERPOL/SP 80TQFP
產品培訓模塊: Data Converter Fundamentals
DAC Architectures
標準包裝: 1
系列: TxDAC+®
位數: 16
數據接口: 并聯
轉換器數目: 1
電壓電源: 單電源
功率耗散(最大): 1.25W
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 80-TQFP 裸露焊盤
供應商設備封裝: 80-TQFP-EP(12x12)
包裝: 托盤
輸出數目和類型: 2 電流,單極
采樣率(每秒): 500M
AD9786
Rev. B | Page 28 of 56
03152-046
Figure 46. DATACLK Duty Cycle
03152-047
tD = 6ns TYP
tH = 2.9ns MIN
tS = –0.5ns MIN
DACCLKIN
DATACLKOUT
DATA
Figure 47. Data Timing, 2× Interpolation, DCLKPOL = 0
tD = 5ns TYP
tS = –0.5ns MIN
tH = 2.9ns MIN
DACCLKIN
DATACLKOUT
DATA
03152-048
Figure 48. Data Timing, 2× Interpolation, DCLKPOL = 1
DATACLK Slave Mode (Data Recovery On)
DATACLK (Pin 31) can be used as an input to synchronize
multiple AD9786s. A clock generated by an AD9786 operating
in master mode, or a clock from an external source, can be used
to drive DATACLK.
In this mode, two clocks are required to be applied to the
AD9786. A clock running at the DAC sample rate, referred to as
DACCLK, must be applied to the differential inputs (Pin 5 and
Pin 6) of the AD9786. As described previously, a clock at the
input sample rate must also be applied to Pin 31 (DATACLK).
An internal DLL synchronizes the two applied clocks. The
timing relationships between the input data, DATACLK, and
DACCLK are given in Figure 49 and Figure 50.
Note that DCLKPOL (Register 0x02, Bit 4) can be used to select
the edge of DACCLK upon which the input data is latched.
There is a defined setup-and-hold window with respect to input
data and the latching edge of DACCLK. There is also a required
timing relationship between DATACLK and DACCLK. This is
referred to in Figure 49 and Figure 50 as tST and tHT (setup and
hold for transition). For example, with DCLKPOL set to Logic 0,
the input data latches upon the first rising edge of DACCLK
that occurs more than 1.5 ns before the falling edge of DATACLK.
DACCLK should not be given a rising edge in the window of
500 ps to 1.5 ns before the latching edge (falling edge when
DCLKPOL = 0, rising edge when DCLKPOL = 1) of DATACLK.
Failure to account for this timing relationship could result in
corrupt data.
There are three status bits available for a read that allow the user
to verify DLL lock. These are Bit 0, Bit 1, and Bit 2 (DCRCSTAT) in
Register 0x12.
03152-049
DACCLKIN
DATACLKIN
DATA
tHT = 1.5ns MIN
tS = 0.0ns MIN
tST = –500ps MIN
tH = 3.2ns MIN
Figure 49. Slave Mode Timing, 2× Interpolation, DCLKPOL = 0
03152-050
DACCLKIN
DATACLKIN
DATA
tHT = 2.0ns MIN
tS = 0.0ns MIN
tST = –1.0ns MIN
tH = 3.2ns MIN
Figure 50. Slave Mode Timing, 2× Interpolation, DCLKPOL = 1
相關PDF資料
PDF描述
MS27508E18F35A CONN HSG RCPT 66POS BOX MT PIN
DAC8420EPZ IC DAC 12BIT QUAD SRL-OUT 16DIP
MS27508E18A35A CONN HSG RCPT 66POS BOX MT PIN
VE-J60-MZ-S CONVERTER MOD DC/DC 5V 25W
GTC030-28-12SLC CONN HSG RCPT 26POS PNL MT SCKT
相關代理商/技術參數
參數描述
AD9786BSVZRL 功能描述:IC DAC 16BIT INTERPOL/SP 80TQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC+® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1,000 系列:- 設置時間:1µs 位數:8 數據接口:串行 轉換器數目:8 電壓電源:雙 ± 功率耗散(最大):941mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC W 包裝:帶卷 (TR) 輸出數目和類型:8 電壓,單極 采樣率(每秒):*
AD9786-EB 制造商:Rochester Electronics LLC 功能描述:EVAL BOARD FOR AD9786 - Bulk
AD9786-EBZ 功能描述:BOARD EVALUATION FOR AD9786 RoHS:是 類別:編程器,開發系統 >> 評估板 - 數模轉換器 (DAC) 系列:TxDAC+® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- DAC 的數量:4 位數:12 采樣率(每秒):- 數據接口:串行,SPI? 設置時間:3µs DAC 型:電流/電壓 工作溫度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581
AD9786XSV 制造商:Analog Devices 功能描述:- Bulk
AD9787 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual 12-/14-/16-Bit 800 MSPS DAC with Low Power 32-Bit Complex NCO