- 您現在的位置：買賣IC網 > PDF目錄375248 > AD9774AS (ANALOG DEVICES INC) 14-Bit, 32 MSPS TxDAC⑩ with 4x Interpolation Filters PDF資料下載
參數資料
| 型號： | AD9774AS |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | DAC |
| 英文描述： | 14-Bit, 32 MSPS TxDAC⑩ with 4x Interpolation Filters |
| 中文描述： | PARALLEL, WORD INPUT LOADING, 0.035 us SETTLING TIME, 14-BIT DAC, PQFP44 |
| 封裝： | METRIC, QFP-44 |
| 文件頁數： | 7/24頁 |
| 文件大?。?/td> | 313K |
| 代理商： | AD9774AS |
AD9774
–7–
REV. B
DEFINITIONS OF SPECIFICATIONS
Linearity Error (Also Called Integral Nonlinearity or INL)
Linearity error is defined as the maximum deviation of the actual
analog output from the ideal output, determined by a straight
line drawn from zero to full scale.
Differential Nonlinearity (or DNL)
DNL is the measure of the variation in analog value, normalized
to full scale, associated with a 1 LSB change in digital input code.
Monotonicity
A D/A converter is monotonic if the output either increases or
remains constant as the digital input increases.
Offset Error
The deviation of the output current from the ideal of zero is
called offset error. For IOUTA, 0 mA output is expected when
the inputs are all 0s. For IOUTB, 0 mA output is expected
when all inputs are set to 1s.
Gain Error
The difference between the actual and ideal output span. The
actual span is determined by the output when all inputs are set
to 1s, minus the output when all inputs are set to 0s.
Output Compliance Range
The range of allowable voltage at the output of a current-output
DAC. Operation beyond the maximum compliance limits may
cause either output stage saturation or breakdown, resulting in
nonlinear performance.
Temperature Drift
Temperature drift is specified as the maximum change from the
ambient (+25
°
C) value to the value at either T
MIN
or T
MAX
. For
offset and gain drift, the drift is reported in ppm of full-scale
range (FSR) per degree C. For reference drift, the drift is re-
ported in ppm per degree C.
Power Supply Rejection
The maximum change in the full-scale output as the supplies
are varied from nominal to minimum and maximum specified
voltages.
Settling Time
The time required for the output to reach and remain within a
specified error band about its final value, measured from the
start of the output transition.
Glitch Impulse
Asymmetrical switching times in a DAC give rise to undesired
output transients that are quantified by a glitch impulse. It is
specified the net area of the glitch in pV-s.
Spurious-Free Dynamic Range
The difference, in dB, between the rms amplitude of the output
signal and the peak spurious signal over the specified bandwidth.
Total Harmonic Distortion
THD is the ratio of the rms sum of the first six harmonic com-
ponents to the rms value of the measured input signal. It is
expressed as a percentage or in decibels (dB).
Signal-to-Noise Ratio (SNR)
S/N is the ratio of the rms value of the measured output signal
to the rms sum of all other spectral components below the
Nyquist frequency, excluding the first six harmonics and dc.
The value for SNR is expressed in decibels.
Passband
Frequency band in which any input applied therein passes
unattenuated to the DAC output.
Stopband Rejection
The amount of attenuation of a frequency outside the passband
applied to the DAC, relative to a full-scale signal applied at the
DAC input within the passband.
Group Delay
Number of input clocks between an impulse applied at the
device input and peak DAC output current.
Impulse Response
Response of the device to an impulse applied to the input.
VCO
IN/EXT
PLL
DIVIDE
PLLCOM
REFLO
PLL CLOCK
MULTIPLIER
REFIO
CLK
IN/OUT
SNOOZE
IOUTA
FSADJ
AD9774
SLEEP
DCOM DVDD ICOMP ACOM AVDD
+1.2V REFERENCE
AND CONTROL AMP
PLL
ENABLE
PLLLOCK
CLK4
3
IN
PLLVDD
LPF
IOUTB
TLATCHES
14-BIT DAC
2
3
2
3
1
3
2
3
4
3
4
3
14
14
14
14
DATA
T
50
20pF
50
20pF
0.1
m
F
100
V
MINI-CIRCUITS
T1-1T
TO HP3589A
SPECTRUM/NETWORK
ANALYZER
50
V
INPUT
0.01
m
F
1.5k
V
+3V
D
+3V
D
+3V
D
0.1
m
F
+5V
A
1.91k
V
0.1
m
F
REFCOMP
O
Figure 3. Basic AC Characterization Test Setup
相關PDF資料 |
PDF描述 |
|---|---|
| AD9774EB | 14-Bit, 32 MSPS TxDAC⑩ with 4x Interpolation Filters |
| AD9774 | 14-Bit，32 MSPS DAC with 4× Interpolation Filters(14位的，輸入數據數率為32MSPS的具有內插濾波器的D/A轉換器) |
| AD9775 | 14-Bit, 160 MSPS 2X/4X/8X Interpolating Dual TxDAC+ D/A Converter |
| AD9775BSV | 14-Bit, 160 MSPS 2X/4X/8X Interpolating Dual TxDAC+ D/A Converter |
| AD9775EB | 14-Bit, 160 MSPS 2X/4X/8X Interpolating Dual TxDAC+ D/A Converter |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9774ASRL | 制造商:Analog Devices 功能描述:DAC 1-CH Segment 14-bit 44-Pin MQFP T/R 制造商:Rochester Electronics LLC 功能描述:14-BIT 32 MSPS TXDAC W/4X INTERPOLATION - Bulk |
| AD9774ASZ | 功能描述:IC DAC 14BIT 32MSPS 44-MQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC+® 標準包裝:2,400 系列:- 設置時間:- 位數:18 數據接口:串行 轉換器數目:3 電壓電源:模擬和數字 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:36-TFBGA 供應商設備封裝:36-TFBGA 包裝:帶卷 (TR) 輸出數目和類型:* 采樣率（每秒）:* |
| AD9774ASZRL | 功能描述:IC DAC 14BIT 32MSPS 44MQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC+® 標準包裝:2,400 系列:- 設置時間:- 位數:18 數據接口:串行 轉換器數目:3 電壓電源:模擬和數字 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:36-TFBGA 供應商設備封裝:36-TFBGA 包裝:帶卷 (TR) 輸出數目和類型:* 采樣率（每秒）:* |
| AD9774EB | 制造商:AD 制造商全稱:Analog Devices 功能描述:14-Bit, 32 MSPS TxDAC⑩ with 4x Interpolation Filters |
| AD9774-EB | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。