參數資料
型號: AD9706-DPG2-EBZ
廠商: Analog Devices Inc
文件頁數: 33/44頁
文件大?。?/td> 0K
描述: BOARD EVAL FOR AD9706
標準包裝: 1
系列: *
Data Sheet
AD9704/AD9705/AD9706/AD9707
Rev. B | Page 39 of 44
The AD9704/AD9705/AD9706/AD9707 devices allow reading
and writing of the calibration coefficients. There are 33 coefficients
in total. The read/write feature of the coefficients can be useful
for improving the results of the self-calibration routine by averaging
the results of several calibration results and loading the averaged
results back into the device. The reading and writing routines
follow.
To read the calibration coefficients to the device:
1.
Enable the calibration clock by setting the CALCLK bit
(Register 0x02, Bit 0).
2.
Write the address of the first coefficient (0x00) to
Register 0x10.
3.
Set the SMEMRD bit (Register 0x0F, Bit 2) by writing 0x04
to Register 0x0F.
4.
Wait at least 160 CLK+/CLK clock cycles.
5.
Read the value of the first coefficient by reading the
contents of Register 0x11.
6.
Clear the SMEMRD bit by writing 0x00 to Register 0x0F.
7.
Repeat Step 2 through Step 6 for each of the remaining 32
coefficients by incrementing the address by one for each
read.
8.
Disable the calibration clock by clearing the CALCLK Bit
(Register 0x02, Bit 0).
To write the calibration coefficients to the device:
1.
Enable the calibration clock by setting the CALCLK bit
(Register 0x02, Bit 0).
2.
Set the SMEMWR bit (Register 0x0F, Bit 3) by writing 0x08
to Register 0x0F.
3.
Write the address of the first coefficient (0x00) to
Register 0x10.
4.
Write the value of the first coefficient to Register 0x11.
5.
Wait at least 160 CLK+/CLK clock cycles
6.
Repeat Step 3 through Step 5 for each of the remaining 32
coefficients by incrementing the address by one for each write.
7.
Clear the SMEMWR bit by writing 0x00 to Register 0x0F.
8.
Disable the calibration clock by clearing the CALCLK bit
(Register 0x02, Bit 0).
相關PDF資料
PDF描述
AD9705-DPG2-EBZ BOARD EVAL FOR AD9705
MIC2026-2YM IC DISTRIBUTION SW DUAL 8-SOIC
UVZ2E331MRD CAP ALUM 330UF 250V 20% RADIAL
VE-B5B-EY CONVERTER MOD DC/DC 95V 50W
AD9783-DPG2-EBZ BOARD EVAL FOR AD9783
相關代理商/技術參數
參數描述
AD9706-EB 制造商:Analog Devices 功能描述:
AD9706-EBZ 功能描述:BOARD EVAL FOR AD9706 RoHS:是 類別:編程器,開發系統 >> 評估板 - 數模轉換器 (DAC) 系列:TxDAC® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- DAC 的數量:4 位數:12 采樣率(每秒):- 數據接口:串行,SPI? 設置時間:3µs DAC 型:電流/電壓 工作溫度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581
AD9707BCPZ 功能描述:IC DAC TX 14BIT 175MSPS 32-LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP,8-MSOP(0.118",3.00mm 寬) 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓,單極 采樣率(每秒):* 產品目錄頁面:1398 (CN2011-ZH PDF)
AD9707BCPZRL7 功能描述:IC DAC TX 14BIT 175MSPS 32-LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC® 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散(最大):55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):*
AD9707-DPG2-EBZ 功能描述:BOARD EVAL FOR AD9707 RoHS:是 類別:編程器,開發系統 >> 評估板 - 數模轉換器 (DAC) 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- DAC 的數量:4 位數:12 采樣率(每秒):- 數據接口:串行,SPI? 設置時間:3µs DAC 型:電流/電壓 工作溫度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581