- 您現在的位置：買賣IC網 > PDF目錄17026 > AD9257-65EBZ (Analog Devices Inc)BOARD EVAL FOR AD9257 PDF資料下載
參數資料
| 型號： | AD9257-65EBZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 22/40頁 |
| 文件大?。?/td> | 0K |
| 描述： | BOARD EVAL FOR AD9257 |
| 標準包裝： | 1 |
| ADC 的數量： | 8 |
| 位數： | 14 |
| 采樣率（每秒）： | 65M |
| 數據接口： | 串行，SPI? |
| 輸入范圍： | 2 Vpp |
| 在以下條件下的電源（標準）： | 55mW @ 65MSPS |
| 工作溫度： | -40°C ~ 85°C |
| 已用 IC / 零件： | AD9257 |
| 已供物品： | 板 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁當前第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁
Data Sheet
AD9257
Rev. A | Page 29 of 40
HARDWARE INTERFACE
The pins described in Table 15 comprise the physical interface
between the user programming device and the serial port of the
AD9257. The SCLK pin and the CSB pin function as inputs
when using the SPI interface. The SDIO pin is bidirectional,
functioning as an input during write phases and as an output
during readback.
The SPI interface is flexible enough to be controlled by either
FPGAs or microcontrollers. One method for SPI configuration
is described in detail in the AN-812 Application Note, Micro-
controller-Based Serial Port Interface (SPI) Boot Circuit.
The SPI port should not be active during periods when the full
dynamic performance of the converter is required. Because the
SCLK signal, the CSB signal, and the SDIO signal are typically
asynchronous to the ADC clock, noise from these signals can
degrade converter performance. If the on-board SPI bus is used for
other devices, it may be necessary to provide buffers between
this bus and the AD9257 to prevent these signals from transi-
tioning at the converter inputs during critical sampling periods.
Some pins serve a dual function when the SPI interface is not
being used. When the pins are strapped to DRVDD or ground
during device power-on, they are associated with a specific
function. Table 13 and Table 14 describe the strappable
functions supported on the AD9257.
CONFIGURATION WITHOUT THE SPI
In applications that do not interface to the SPI control registers,
the SDIO/DFS pin, the SCLK/DTP pin, and the PDWN pin
serve as standalone CMOS-compatible control pins. When the
device is powered up, it is assumed that the user intends to use the
pins as static control lines for the output data format, output
digital test pattern, and power-down feature control. In this
mode, CSB should be connected to AVDD, which disables the
serial port interface.
When the device is in SPI mode, the PDWN pin (if enabled)
remains active. For SPI control of power-down, the PDWN pin
should be set to its default state.
SPI ACCESSIBLE FEATURES
Table 16 provides a brief description of the general features that
are accessible via the SPI. These features are described in detail
in the AN-877 Application Note, Interfacing to High Speed ADCs
via SPI. The AD9257 part-specific features are described in detail
in the Memory Map Register Descriptions section following
Table 17, the external memory map register table.
Table 16. Features Accessible Using the SPI
Feature Name
Description
Mode
Allows the user to set either power-down mode
or standby mode
Clock
Allows the user to access the DCS, set the clock
divider, set the clock divider phase, and enable
the sync
Offset
Allows the user to digitally adjust the converter
offset
Test I/O
Allows the user to set test modes to have
known data on output bits
Output Mode
Allows the user to set the output mode
Output Phase
Allows the user to set the output clock polarity
ADC Resolution
and Speed Grade
Scalable power consumption options based on
resolution and speed grade selection
相關PDF資料 |
PDF描述 |
|---|---|
| GMM10DRYH | CONN EDGECARD 20POS DIP .156 SLD |
| AD9253-125EBZ | BOARD EVAL FOR AD9253-125 |
| GCM15DRYF | CONN EDGECARD 30POS DIP .156 SLD |
| VE-2WX-EY | CONVERTER MOD DC/DC 5.2V 50W |
| STD21W-G | WIRE & CABLE MARKERS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9257BCPZ-40 | 功能描述:IC ADC OCTAL 14BIT 64LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| AD9257BCPZ-65 | 功能描述:IC ADC 14BIT SRL 65MSPS 64LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:250 系列:- 位數:12 采樣率（每秒）:1.8M 數據接口:并聯 轉換器數目:1 功率耗散（最大）:1.82W 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-LQFP 供應商設備封裝:48-LQFP（7x7） 包裝:管件 輸入數目和類型:2 個單端，單極 |
| AD9257BCPZRL7-40 | 功能描述:IC ADC 14BIT SRL 40MSPS 64LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
| AD9257BCPZRL7-65 | 功能描述:IC ADC 14BIT SRL 65MSPS 64LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:250 系列:- 位數:12 采樣率（每秒）:1.8M 數據接口:并聯 轉換器數目:1 功率耗散（最大）:1.82W 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-LQFP 供應商設備封裝:48-LQFP（7x7） 包裝:管件 輸入數目和類型:2 個單端，單極 |
| AD9257TCPZ-65-EP | 功能描述:14 Bit Analog to Digital Converter 8 Input 8 Pipelined 64-LFCSP-WQ (9x9) 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:有效 位數:14 采樣率（每秒）:65M 輸入數:8 輸入類型:差分 數據接口:LVDS - 串行 配置:S/H-ADC 無線電 - S/H:ADC:1:1 A/D 轉換器數:8 架構:管線 參考類型:內部 電壓 - 電源，模擬:1.7 V ~ 1.9 V 電壓 - 電源，數字:1.7 V ~ 1.9 V 特性:同步采樣 工作溫度:-55°C ~ 125°C 封裝/外殼:64-WFQFN 裸露焊盤 供應商器件封裝:64-LFCSP-WQ（9x9） 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。