參數資料
型號： AD7879ACPZ-RL
廠商： Analog Devices Inc
文件頁數： 1/41頁
文件大?。?/td> 0K
描述： IC ADC 12BIT CTLR TOUCH 16LFCSP
標準包裝： 1
類型： 電阻
觸摸面板接口： 4 線
輸入數/鍵： 1 TSC
分辨率（位）： 12 b
評估套件： 可供
數據接口： 串行，SPI?
數據速率/采樣率 (SPS，BPS)： 105k
電壓基準： 內部
電源電壓： 1.6 V ~ 3.6 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 16-VQFN 裸露焊盤，CSP
供應商設備封裝： 16-LFCSP-VQ
包裝： 標準包裝
其它名稱： AD7879ACPZ-RLDKR
Low Voltage Controller for Touch Screens
AD7879/AD7889
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
2008–2010 Analog Devices, Inc. All rights reserved.
FEATURES
4-wire touch screen interface
1.6 V to 3.6 V operation
Median and averaging filter to reduce noise
Automatic conversion sequencer and timer
User-programmable conversion parameters
Auxiliary analog input/battery monitor (0.5 V to 5 V)
1 optional GPIO
Interrupt outputs (INT, PENIRQ)
Touch-pressure measurement
Wake-up on touch function
Shutdown mode: 6 μA maximum
12-ball, 1.6 mm × 2 mm WLCSP
16-lead, 4 mm × 4 mm LFCSP
APPLICATIONS
Personal digital assistants
Smart handheld devices
Touch screen monitors
Point-of-sale terminals
Medical devices
Cell phones
FUNCTIONAL BLOCK DIAGRAM
REF+
X– Y– X+ Y+
FI
L
T
E
R
IN
G
RESULT
REGISTERS
CONTROL
REGISTERS
SEQUENCER
AND TIMER
REF–
TEMPERATURE
SENSOR
TO
RESULT
REGISTERS
6-
TO
-1
M
U
X
AD7879/
AD7879-1/
AD7889/
AD7889-1
VCC/REF
X+
X–
Y+
Y–
GND
A
U
X
/V
B
A
T/G
P
IO
P
E
NI
RQ
/I
NT
/D
A
V
SERIAL PORT
DIN/
ADD1
DOUT/
SDA
SCL
CS/
ADD0
12-BIT
SAR ADC
REF–
07
66
7-
00
1
Figure 1.
GENERAL DESCRIPTION
The AD7879/AD7889 are 12-bit successive approximation
analog-to-digital converters (SAR ADCs) with a synchronous
serial interface and low on-resistance switches for driving 4-wire
resistive touch screens. The AD7879/AD7889 work with a very
low power supply—a single 1.6 V to 3.6 V supply—and feature
throughput rates of 105 kSPS. The devices include a shutdown
mode that reduces current consumption to less than 6 μA.
To reduce the effects of noise from LCDs and other sources, the
AD7879/AD7889 contain a preprocessing block. The prepro-
cessing function consists of a median filter and an averaging
filter. The combination of these two filters provides a more robust
solution, discarding the spurious noise in the signal and keeping
only the data of interest. The size of both filters is programmable.
Other user-programmable conversion controls include variable
acquisition time and first conversion delay; up to 16 averages
can be taken per conversion. The AD7879/AD7889 can run in
slave mode or standalone (master) mode, using an automatic
conversion sequencer and timer.
The AD7879/AD7889 have a programmable pin that can operate
as an auxiliary input to the ADC, as a battery monitor, or as a
GPIO. In addition, a programmable interrupt output can operate
in three modes: as a general-purpose interrupt to signal when
new data is available (DAV), as an interrupt to indicate when
limits are exceeded (INT), or as a pen-down interrupt when the
screen is touched (PENIRQ). The AD7879/AD7889 offer temp-
erature measurement and touch-pressure measurement.
The AD7879 is available in a 12-ball, 1.6 mm × 2 mm WLCSP
and in a 16-lead, 4 mm × 4 mm LFCSP. The AD7889 is available
in a backside-coated version of the WLCSP. Both parts support
an SPI interface (AD7879/AD7889) or an I2C interface
(AD7879-1/AD7889-1).
相關PDF資料
PDF描述
VI-201-MX-F2 CONVERTER MOD DC/DC 12V 75W
VI-JWR-MX-F4 CONVERTER MOD DC/DC 7.5V 75W
MS27468T25A35SC CONN RCPT 128POS JAM NUT W/SCKT
VI-JWR-MX-F3 CONVERTER MOD DC/DC 7.5V 75W
VI-JWR-MX-F1 CONVERTER MOD DC/DC 7.5V 75W
相關代理商/技術參數
參數描述
AD7879WACPZ-R5 功能描述:Touchscreen Controller 4-Wire 12 bit SPI Interface 16-LFCSP-VQ (4x4) 制造商:analog devices inc. 系列:- 包裝:剪切帶（CT） 零件狀態:在售 類型:電阻 觸摸面板接口:4 線 輸入/按鍵數:1 TSC 分辨率（位）:12 b 評估工具:* 數據接口:SPI 數據速率/采樣率（SPS，BPS）:105k 電壓基準:外部 電壓 - 電源:1.6 V ~ 3.6 V 電流 - 電源:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-VQFN 裸露焊盤，CSP 供應商器件封裝:16-LFCSP-VQ（4x4） 標準包裝:1
AD7879WACPZ-RL 功能描述:TOUCH SCREEN CONTROLLER 制造商:analog devices inc. 系列:- 包裝:帶卷（TR） 零件狀態:在售 觸摸屏:4 線電阻式 分辨率（位）:12 b 接口:SPI 電壓基準:外部 電壓 - 電源:1.6 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-VQFN 裸露焊盤，CSP 供應商器件封裝:16-LFCSP-VQ（4x4） 標準包裝:5,000
AD7879WARUZ-RL 功能描述:IC ADC 12BIT CTLR TOUCH 16TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 觸摸屏控制器 系列:- 標準包裝:96 系列:- 類型:- 觸摸面板接口:- 輸入數/鍵:- 分辨率（位）:- 評估套件:* 數據接口:- 數據速率/采樣率 (SPS，BPS):- 電壓基準:- 電源電壓:- 電流 - 電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
AD7879WARUZ-RL7 功能描述:IC ADC 12BIT CTLR TOUCH 16TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 觸摸屏控制器 系列:- 標準包裝:96 系列:- 類型:- 觸摸面板接口:- 輸入數/鍵:- 分辨率（位）:- 評估套件:* 數據接口:- 數據速率/采樣率 (SPS，BPS):- 電壓基準:- 電源電壓:- 電流 - 電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
AD7880BCHIPS 功能描述:12 Bit Analog to Digital Converter 2 Input 1 SAR Die 制造商:analog devices inc. 系列:- 包裝:管件 零件狀態:上次購買時間 位數:12 采樣率（每秒）:66k 輸入數:2 輸入類型:單端 數據接口:并聯 配置:S/H-ADC 無線電 - S/H:ADC:1:1 A/D 轉換器數:1 架構:SAR 參考類型:外部，電源 電壓 - 電源，模擬:5V 電壓 - 電源，數字:5V 特性:- 工作溫度:-40°C ~ 85°C 封裝/外殼:模具 供應商器件封裝:模具 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*