- 您現在的位置：買賣IC網 > PDF目錄9285 > AD5292BRUZ-20-RL7 (Analog Devices Inc)IC POT DIG 1024P SPI 20K 14TSSOP PDF資料下載
參數資料
| 型號： | AD5292BRUZ-20-RL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 15/32頁 |
| 文件大小： | 0K |
| 描述： | IC POT DIG 1024P SPI 20K 14TSSOP |
| 設計資源： | 30 V Low Cost DAC Using AD5292 Digital Potentiometer (CN0111) Variable Gain Noninverting Amplifier Using AD5292 and OP184 (CN0112) Variable Gain Inverting Amplifier Using AD5292 and OP184 (CN0113) Low Cost, High Voltage, Programmable Gain Instrumentation Amplifier Using AD5292 and AD8221 (CN0114) Programmable High Voltage Source with Boosted Output Current Using AD5292, OP184, and MOSFETs (CN0115) Programmable Bidirectional Current Source Using AD5292 and ADA4091-4 (CN0117) Logarithmic Audio Volume Control with Glitch Reduction Using AD5292 (CN0120) |
| 標準包裝： | 1,000 |
| 接片： | 1024 |
| 電阻（歐姆）： | 20k |
| 電路數： | 1 |
| 溫度系數： | 標準值 35 ppm/°C |
| 存儲器類型： | 非易失 |
| 接口： | 4 線串行 |
| 電源電壓： | 9 V ~ 33 V，±9 V ~ 16.5 V |
| 工作溫度： | -40°C ~ 105°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 14-TSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 14-TSSOP |
| 包裝： | 帶卷 (TR) |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁當前第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁
AD5291/AD5292
Rev. D | Page 22 of 32
THEORY OF OPERATION
The AD5291 and AD5292 digital potentiometers are designed to
operate as true variable resistors for analog signals that remain
within the terminal voltage range of VSS < VTERM < VDD. The
patented ±1% resistor tolerance feature helps to minimize the total
RDAC resistance error, which reduces the overall system error
by offering better absolute matching and improved open-loop
performance. The digital potentiometer wiper position is
determined by the RDAC register contents. The RDAC register
acts as a scratchpad register, allowing as many value changes as
necessary to place the potentiometer wiper in the correct
position. The RDAC register can be programmed with any
position setting using the standard SPI interface by loading the
16-bit data-word. Once a desirable position is found, this value
can be stored in a 20-TP memory register. Thereafter, the wiper
position is always restored to that position for subsequent power-
up. The storing of 20-TP data takes approximately 6 ms; during
this time, the shift register is locked, preventing any changes from
taking place. The RDY pin identifies the completion of this 20-
TP storage.
SERIAL DATA INTERFACE
The AD5291 and AD5292 contain a serial interface (SYNC,
SCLK, DIN and SDO) that is compatible with SPI interface
standards, as well as most DSPs. The part allows writing of data
via the serial interface to every register.
SHIFT REGISTER
The AD5291 and AD5292 shift register is 16 bits wide (see
Figure 2). The 16-bit input word consists of two unused bits
(set to 0), followed by four control bits, and 10 RDAC data bits.
For the AD5291, the lower two RDAC data bits are don’t cares if
the RDAC register is read from or written to. Data is loaded MSB
first (Bit DB15). The four control bits determine the function of
diagram of a typical AD5291 and AD5292 write sequence.
The write sequence begins by bringing the SYNC line low. The
SYNC pin must be held low until the complete data-word is
loaded from the DIN pin. When SYNC returns high, the serial
data-word is decoded according to the commands in
.
The command bits (Cx) control the operation of the digital
potentiometer. The data bits (Dx) are the values that are loaded
into the decoded register. The AD5291 and AD5292 have an
internal counter that counts a multiple of 16 bits (a frame) for
proper operation. For example, AD5291 and AD5292 work with
a 32-bit word but does not work properly with a 31-bit or 33-bit
word. The AD5291 and AD5292 do not require a continuous
SCLK, when
SYNC is high, and all serial interface pins should
be operated at close to the VLOGIC supply rails to minimize
power consumption in the digital input buffers.
RDAC REGISTER
The RDAC register directly controls the position of the digital
potentiometer wiper. For example, when the RDAC register is
loaded with all zeros, the wiper is connected to Terminal B of
the variable resistor. The RDAC register is a standard logic register;
there is no restriction on the number of changes allowed.
Table 11. Command Operation Truth Table
Command Bits [DB13:DB10]
Data Bits [DB9:DB0]1
Command
C3
C2
C1
C0
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Operation
0
X
NOP command: do nothing.
1
0
1
D9
D8
D7
D6
D5
D4
D3
D2
D12
D02
Write contents of serial data to RDAC.
2
0
1
0
X
Read RDAC wiper setting from the SDO
output in the next frame.
3
0
1
X
Store wiper setting: store RDAC setting
to 20-TP memory.
4
0
1
0
X
Reset: refresh RDAC with 20-TP stored
value.
5
0
1
0
1
X
D4
D3
D2
D1
D0
Read contents of 20-TP memory, or
status of 20-TP memory, from the SDO
output in the next frame.
6
0
1
0
X
D3
D2
D1
D0
Write contents of serial data to control
register.
7
0
1
X
Read control register from the SDO
output in the next frame.
8
1
0
X
D0
Software shutdown.
D0 = 0 (normal mode).
D0 = 1 (device placed in shutdown mode).
1 X = don’t care.
2 In the AD5291, this bit is a don’t care.
相關PDF資料 |
PDF描述 |
|---|---|
| DS1100U-200/T&R | IC DELAY LINE 5TAP 200NS 8-USOP |
| VI-274-MW | CONVERTER MOD DC/DC 48V 100W |
| AD7376ARWZ10-RL | IC POT DIGITAL 10K 16-SOIC |
| DS1100U-30/T&R | IC DELAY LINE 5TAP 30NS 8-USOP |
| AD5232BRUZ10-REEL7 | IC POT DGTL DUAL 256POS 16TSSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD5292BRUZ-50 | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 35 ppm/°C 存儲器類型:非易失 接口:3 線串口 電源電壓:2.7 V ~ 5.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN-EP（3x3） 包裝:剪切帶 (CT) 產品目錄頁面:1399 (CN2011-ZH PDF) 其它名稱:MAX5423ETA+TCT |
| AD5292BRUZ-50-RL7 | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR) |
| AD5292SRU-20-EP | 制造商:Analog Devices 功能描述:1024 TAP, 1% DIGIPOT WITH SPI INTERFACE - Rail/Tube 制造商:Analog Devices 功能描述:IC DGTL POT 1024POS 20K 14TSSOP 制造商:Analog Devices 功能描述:1024 tap 1% digiPOT with SPI interface |
| AD5292SRUZ-20-EP | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP 制造商:analog devices inc. 系列:* 零件狀態:在售 標準包裝:96 |
| AD5293 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Single-Channel, 1024-Position, 1% R-Tolerance Digital Potentiometer |
發布緊急采購，3分鐘左右您將得到回復。