- 您現在的位置：買賣IC網 > PDF目錄352488 > A1181 (Allegro MicroSystems, Inc.) Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch PDF資料下載
參數資料
| 型號： | A1181 |
| 廠商： | Allegro MicroSystems, Inc. |
| 英文描述： | Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch |
| 中文描述： | 兩線，可編程，斬波穩定，單極霍爾效應開關 |
| 文件頁數： | 6/16頁 |
| 文件大?。?/td> | 356K |
| 代理商： | A1181 |
14
A1180-DS, Rev. 2
Worcester, Massachusetts 01615-0036 (508) 853-5000
115 Northeast Cutoff, Box 15036
www.allegromicro.com
Allegro MicroSystems, Inc.
Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall Effect Switches
A1180/81/82/83
VPH
V+
t
VPM
VPL
0
Address 1
Address 2
Address n (
≤ 31)
Figure 8. Pulse sequence to select addresses
Falling edge of final BOP address digit
VPH
V+
t
VPM
VPL
0
Encode Lock Bit
Enable
Address
Blow
32 pulses
Figure 9. Pulse sequence to encode lock bit
Lock Bit Programming.
After the desired BOP calibration value
is programmed, and all of the corresponding biteld-level fuses
are blown, the device-level fuse should be blown. To do so, the
lock bit (biteld address 32) should be encoded as 1 and have
its fuse blown. This is done in the same manner as permanently
setting the other bitelds, as shown in gure 9.
Address Selection
.
After addressing mode is enabled, the
target biteld address, is indicated by a series of VPM pulses, as
shown in gure 8.
Figure 7. Addressing mode enable pulse sequence
VPH
V+
t
VPM
VPL
0
Enabling Addressing Mode
.
The rst segment of code is a
keying sequence used to enable the biteld addressing mode. As
shown in gure 7, this segment consists of one short VPH pulse,
one VPM pulse, and one short VPH pulse, with no supply inter-
ruptions. This sequence is designed to prevent the device from
being programmed accidentally, such as by noise on the supply
line.
相關PDF資料 |
PDF描述 |
|---|---|
| A1181EUA | CONV DC-DC 48V IN 3.3/2.5V OUT |
| A1181EUA-T | Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches |
| A3141-LT | SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION |
| A3141-U | SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION |
| A3141-UA | SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION |
相關代理商/技術參數 |
參數描述 |
|---|---|
| A118-1 | 功能描述:SWITCH HARDWARE RoHS:是 類別:開關 >> 配件 - 帽蓋 系列:800 標準包裝:1 系列:AP 開關類型:按鈕 形狀:圓形，凸起（圓頂） 顏色:紅 發光:發光開口 適用于相關產品:AP 系列 安裝類型:卡入式 尺寸:12.35mm 直徑 x 6.25mm H 特點:- 配用:AP2N006TZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N003TZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N002TZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N006SZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N003SZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N002SZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP4N007SWBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N007TZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP2N007SZBE-ND - SWITCH PUSH SPST-NO 0.125A 125VAP4N006TZBE-ND - SWITCH PUSH SPST-NO 0.125A 125V更多... 其它名稱:*481D03001 |
| A1181ELHLT | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches |
| A1181ELHLT-T | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches |
| A1181EUA | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches |
| A1181EUA-T | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Sensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches |
發布緊急采購，3分鐘左右您將得到回復。