參數資料
型號： 935260439112
廠商： NXP SEMICONDUCTORS
元件分類： 穩壓器
英文描述： 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
封裝： 7.50 MM, PLASTIC, SO-20
文件頁數： 29/31頁
文件大?。?/td> 417K
代理商： 935260439112
1999 Jan 27
7
Philips Semiconductors
Preliminary specication
Fast charge ICs for NiCd, NiMH, SLA and
LiIon
TEA1102; TEA1102T;
TEA1102TS
After the ‘fill-up’ period the charge current is not regulated,
which means that the output drivers AO and PWM are
fixed to zero. When the battery voltage becomes less than
3 V for Lilon and 1.5 V for SLA, the IC enters the fast
charge mode again.
FUNCTIONAL DESCRIPTION
Control logic
The main function of the control logic is to support the
communication between several blocks. It also controls
the charge method, initialization and battery full detection.
The block diagram of the TEA1102x is illustrated in Fig.1.
Conditioning charge method and initializations
At system switch-on, or at battery insertion, the control
logic sets the initialization mode in the timer block. After
the initialization time the timer program pins can be used
to indicate the charging state using several LEDs.
The charge method is defined at the same time by the
following methods:
If the FCT pin is 0 or 1.25 V, indicating that SLA or LiIon
batteries have to be charged, the battery will be charged
by limit current and limit voltage regulation. Without
identification (FCT pin floating), the system will charge
the battery according to the charge characteristic of
NiCd and NiMH batteries.
The standby charge method (NiCd and NiMH), trickle
charge or voltage regulation, is defined by the input pin
Vstb. By biasing this voltage with a set voltage, the output
voltage will be regulated to the Vstb set voltage. If this pin
is connected to VS, or no NTC is connected the system
applies trickle charge.
If pin RFSH is connected to ground by depressing the
switch, the TEA1102x discharges the battery via an
external transistor connected to pin RFSH. The discharge
current is regulated with respect to the external (charge)
sense resistor (Rsense). End-of-discharge is reached when
the battery is discharged to 1 V per cell. Refreshing the
battery can only be activated during charging of NiCd and
NiMH batteries. When charging LiIon and SLA batteries,
discharge before charge is disabled.
The inhibit mode has the main priority. This mode is
activated when the Vstb input pin is connected to ground.
Inhibit can be activated at any charge/discharge state,
whereby the output control signals will be zero, all LEDs
will be disabled and the charger timings will be set on hold.
Table 1 gives an operational summary.
Table 1
Functionality of program pins
Notes
1. Where X = don’t care.
2. Not low means floating or high.
3. The NTC voltage has been to be less than 3.3 V, which indicates the presence of an NTC.
4. The NTC voltage is outside the window for NTC detection.
5. Vstb has to be floating or set to a battery regulating voltage in accordance with the specification.
FUNCTION
FCT
NTC
RFSH
Vstb
Inhibit
X(1)
low
LiIon and SLA detection
low
X(1)
Refresh (NiCd and NiMH)
not low(2)
X(1)
low
not low
T/t detection
oating
note 3
not low
T/t and voltage peak detection
high
note 3
not low
Voltage peak detection
not low
note 4
not low
Trickle charge at standby
not low
X(1)
not low
high
not low
note 4
not low
Voltage regulation at standby
not low
note 3
not low
oating(5)
相關PDF資料
PDF描述
935261411112 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
935261411118 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
TEA1102TD-T 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
TEA1102TSDB 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
935260813112 PLL FREQUENCY SYNTHESIZER, 2100 MHz, PDSO20
相關代理商/技術參數
參數描述
935261069122 制造商:NXP Semiconductors 功能描述:IC SECURITY TRANSPONDER PLLMC
935262025112 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935262217118 制造商:NXP Semiconductors 功能描述:Real Time Clock Serial 8-Pin SO T/R
935264217557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935267356112 制造商:NXP Semiconductors 功能描述:IC TEA1507PN
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*