
Go to Philips Semiconductors' home page
Select & Go...
Start
part
Catalog & Datasheets
Catalog by Function
Discrete semiconductors
Audio
Clocks and Watches
Data communications
Microcontrollers
Peripherals
Standard analog
Video
Wired communications
Wireless communications
Catalog by System
Automotive
Consumer Multimedia
Systems
Communications
PC/PC-peripherals
Cross reference
Models
Packages
Application notes
Selection guides
Other technical documentation
End of Life information
Datahandbook system
Relevant Links
About catalog tree
About search
About this site
Subscribe to eNews
Catalog & Datasheets
Search
TEA1102; TEA1102T;
TEA1102TS
TEA1102; TEA1102T;
TEA1102TS
Information as of 2000-08-19
TEA1102; TEA1102T; TEA1102TS; Fast charge ICs for NiCd, NiMH, SLA and LiIon
The TEA1102x are fast charge ICs which are able fast charge NiCd and NiMH, SLA and Lilon batteries.
The main fast charge termination for NiCd and NiMH batteries are
T/t and peak voltage detection, both of which are well proven
techniques. The TEA1102x automatically switches over from
T/t to peak voltage detection if the thermistor fails or is not present. The
T/t detection sensitivity is temperature dependent, thus avoiding false charge termination. Three charge states can be distinguished;
fast, top-off and trickle.
Charging Lilon and SLA batteries is completely different. When the batteries reach their maximum voltage (adjustable), the TEA1102x
switches over from current regulation to voltage regulation. After a defined time period, which is dependent on battery capacity and charge
current, charge is terminated. Due to small self discharge rates of Lilon and SLA batteries, trickle charge can be omitted.
Several LEDs, as well as a buzzer, can be connected to the TEA1102x for indicating battery insertion, charge states, battery full condition
and protection mode.
The TEA1102x are contained in a 20-pin package and are manufactured in a BiCMOS process, essentially for integrating the complex mix
of requirements in a single chip solution. Only a few external low cost components are required in order to build a state of the art charger.
l
Safe and fast charging of Nickel Cadmium (NiCd), Nickel Metal Hydride (NiMH), Lithium Ion (LiIon), and Sealed Lead Acid (SLA)
batteries
l
Three charge states for NiCd or NiMH; fast, top-off and trickle or voltage regulation (optional)
l
Two charge states for LiIon or SLA; current and voltage limited
l
Adjustable fast charge current [0.5CA to 5CA nominal (CA = Capacity Amperes)]
l
DC top-off and pulsating trickle charge current (NiCd and NiMH)
Description
Features
Datasheet
Products, packages, availability and ordering
Find similar products
To be kept informed on TEA1102; TEA1102T; TEA1102TS,
subscribe to eNews.
Subscribe
to eNews
Description
Features