參數資料
| 型號： | 8343 |
| 廠商： | 3M |
| 文件頁數： | 7/16頁 |
| 文件大?。?/td> | 0K |
| 描述： | WORKSURFACE RIGID ESD DISSP BGE |
| 標準包裝： | 1 |
| 系列： | 8300 |
| 墊子類型： | 桌子，工作臺 |
| 形狀： | 矩形 |
| 長度： | 3'（0.91m） |
| 寬： | 2'（0.61m） |
| 厚度： | 0.13"（3.30mm） |
| 顏色： | 淺褐 |
| 材質： | Laminate |
| 特點： | 耗散 |
| 包括： | 接地軟線，接地卡扣 |
| 其它名稱： | 05400718618 98079815845 |
1
78-8136-3801-8
2.0
Cleaning and Maintenance
A.
The 3M Rigid Worksurface 8300 Series is readily cleaned with 3M Static Control Worksurface
Mark Remover 8001. It can also be cleaned with warm water and mild detergents. Many commercially
available detergents are suitable, including common household dishwashing liquids.
B.
Nonabrasive, commercially available surface cleaners such as glass cleaners or products similar to
SoftScrub are suitable. Cleaners containing abrasives or strong acids or alkalines should be avoided.
C.
Stains such as those caused by solder flux, varnishes, ink, etc., can be removed with organic solvents
(alcohols, ketones, xylene, mineral spirits). Such stains can also be removed by a twominute exposure
to a 5% hypochlorite bleach (common laundry bleach) followed immediately by a clean water rinse.
D.
The surface should be protected from heat and from cuts and gouges by means of a hot pad and/or
cutting board. 3M Rigid Worksurfaces will not be affected by drops of molten solder, but will blister
if a soldering iron or some other intensely hot object is left on the surface. Blistering will occur at
approximately 400°F (204°C).
E.
ANYTIME THE LAMINATE SURFACE IS CLEANED OR OTHERWISE AFFECTED, THE
ELECTRICAL PERFORMANCE SHOULD BE VERIFIED.
3.0
Repair
A.
Colored paste can be used to visually repair minor defects in the top surface.
B.
Laminate that was adhered with contact adhesive and that lifts from the substrate can be readhered by
applying heat and pressure. A simple method is to place a piece of cloth over the problem area and then
iron it with a household iron.
C.
While most decorative commercial laminate can be recovered with additional laminate by sanding the
existing surface, cleaning it, and reapplying adhesive, this practice will not work well with 3M Static
Dissipative Rigid Worksurface 8300 Series. The 3M laminate is manufactured with a special, tough,
abrasionresistant coating that resists sanding. Therefore, adhesive will not bond well to the surface.
4.0
Troubleshooting Guide
Surface changes
Discoloration
Due to sunlight
Laminate not intended for outdoor use
Keep laminate away from direct
sunlight
Due to chemicals
Avoid prolonged exposure to bleaches,
acids, alkalis
Due to heat
Remove/insulate heat source
Dents/depressions due to substrate
imperfections
Use higherdensity, thicker, or
smoother substrate
Cover at least 80% of the bond
surfaces with adhesive
相關PDF資料 |
PDF描述 |
|---|---|
| 2-1419104-2 | RELAY GEN PURPOSE SPST 30A 48V |
| 431301-23-0 | TERM BARRIER 23CIRC 1 ROW .4375 |
| V23061B1005A301 | RELAY GEN PURPOSE SPDT 8A 12V |
| GP1500R-0.010-02-0816 | THERMAL PAD .010" 8"X16" GP1500R |
| 431201-23-0 | TERM BARRIER 23CIRC 1 ROW .4375 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 8-34304-1 | 功能描述:端子 SPLICE CE 22-14 RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規(guī):26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 8-34306-1 | 制造商:TE Connectivity 功能描述:SPLICES TERM 16-22AWG 19.05MM TIN - Bulk |
| 8-34308-2 | 制造商:TE Connectivity 功能描述:SPLICES TERM 10-22AWG 24.77MM TIN - Bulk |
| 83431032A35 | 制造商:n/a 功能描述:Ships in 2 days |
| 8-34313-1 | 功能描述:端子 PIDG HK 22-16 COM 22-18 MIL 6 RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規(guī):26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
發(fā)布緊急采購，3分鐘左右您將得到回復。