*C
MS5F6137
13
13
-
Fuji Electric Device Technology is constantly making every endeavor to improve the product quality and reliability.
However, semiconductor products may rarely happen to fail or malfunction. To prevent accidents causing injury or
death, damage to property like by fire, and other social damage resulted from a failure or malfunction of
the Fuji Electric Device Technology semiconductor products, take some measures to keep safety such as redundant
design, spread-fire-preventive design, and malfunction-protective design.
り
╬
-
The application examples described in this specification only explain typical ones that used the Fuji Electric Device
Technology products. This specification never ensure to enforce the industrial property and other rights, nor license the
enforcement rights.
タ
-
The product described in this specification is not designed nor made for being applied to the equipment or
systems used under life-threatening situations. When you consider applying the product of this specification
to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices,
atomic control systems and submarine relaying equipment or systems,
please apply after confirmation
of this product to be satisfied about system construction and required reliability.
タ
ゞ≮
If there is any unclear matter in this specification, please contact Fuji Electric Device Technology Co.,Ltd.
Warnings
- Never add the excessive mechanical stress to the main or control terminals when the product is applied to
equipments. The module structure may be broken.
┵┵┵
- In case of insufficient -VGE, erroneous turn-on of IGBT may occur. -VGE shall be set enough value to prevent
this malfunction. (Recommended value : -VGE = -15V)
- In case of higher turn-on dv/dt of IGBT, erroneous turn-on of opposite arm IGBT may occur. Use this product in
the most suitable drive conditions, such as +VGE, -VGE, RG to prevent the malfunction.
╬
- This product may be broken by avalanche in case of VCE beyond maximum rating VCES is applied between
C-E terminals. Use this product within its absolute maximum voltage.