參數(shù)資料
型號: 25C128
廠商: Microchip Technology Inc.
英文描述: 128K 5.0V SPI Bus Serial EEPROM(4.5~5.5V,128K位,SPI總線串行EEPROM)
中文描述: 128K的5.0V SPI總線串行EEPROM(4.5?5.5V的,128K的位和SPI總線串行EEPROM的)
文件頁數(shù): 108/170頁
文件大小: 4191K
代理商: 25C128
PIC16F62X
DS40300C-page 106
Preliminary
2003 Microchip Technology Inc.
14.12 In-Circuit Serial Programming
The PIC16F62X microcontrollers can be serially
programmed while in the end application circuit. This is
simply done with two lines for clock and data, and three
other lines for power, ground, and the programming
voltage. This allows customers to manufacture boards
with unprogrammed devices, and then program the
microcontroller just before shipping the product. This
also allows the most recent firmware, or a custom
firmware to be programmed.
The device is placed into a Program/Verify mode by
holding the RB6 and RB7 pins low while raising the
MCLR (V
PP
) pin from V
IL
to V
IHH
(see programming
specification). RB6 becomes the programming clock
and RB7 becomes the programming data. Both RB6
and RB7 are Schmitt Trigger inputs in this mode.
After RESET, to place the device into Programming/
Verify mode, the program counter (PC) is at location
00h. A 6-bit command is then supplied to the device.
Depending on the command, 14 bits of program data
are then supplied to or from the device, depending if
the command was a load or a read. For complete
details of serial programming, please refer to the
Programming Specifications.
A typical in-circuit serial programming connection is
shown in Figure 14-18.
FIGURE 14-18:
TYPICAL IN-CIRCUIT
SERIAL PROGRAMMING
CONNECTION
14.13 Low Voltage Programming
The LVP bit of the configuration word, enables the low
voltage programming. This mode allows the microcon-
troller to be programmed via ICSP using only a 5V
source. This mode removes the requirement of V
IHH
to
be placed on the MCLR pin. The LVP bit is normally
erased to '1', which enables the low voltage program-
ming. In this mode, the RB4/PGM pin is dedicated to
the programming function and ceases to be a general
purpose I/O pin. The device will enter Programming
mode when a '1' is placed on the RB4/PGM pin. The
HV Programming mode is still available by placing V
IHH
on the MCLR pin.
If Low voltage Programming mode is not used, the LVP
bit can be programmed to a '0', and RB4/PGM
becomes a digital I/O pin. To program the device, V
IHH
must be placed onto MCLR during programming. The
LVP bit may only be programmed when programming
is entered with V
IHH
on MCLR. The LVP bit cannot be
programmed when programming is entered with RB4/
PGM.
It should be noted, that once the LVP bit is programmed
to 0, High voltage Programming mode can be used to
program the device.
External
Connector
Signals
To Normal
Connections
To Normal
Connections
PIC16F62X
V
DD
V
SS
RA5/MCLR/V
PP
RB6/PGC
RB7/PGD
+5V
0V
V
PP
CLK
Data I/O
V
DD
Note 1:
While in this mode, the RB4 pin can no
longer be used as a general purpose I/O
pin.
2:
V
DD
must be 5.0V +10% during erase/
program operations while in low voltage
Programming mode.
相關PDF資料
PDF描述
25LC128 128K 5.0V SPI Bus Serial EEPROM(2.5~5.5V,128K位,SPI總線串行EEPROM)
25C256 256K 5.0V SPI Bus Serial EEPROM(4.5~5.5V,256K位,SPI總線串行EEPROM)
25C160 8K/16K 5.0V SPI Bus Serial EEPROM
25C080 8K 5.0V SPI Bus Serial EEPROM(4.5~5.5V,3MHz,8K位,10M次可自定時擦寫周期,EEPROM)
25C320 32K 5.0V SPI Bus Serial EEPROM
相關代理商/技術參數(shù)
參數(shù)描述
25C14X51AM 功能描述:保險絲 CYL 25A 660V 14x51mm RoHS:否 制造商:Littelfuse 產品:Surface Mount Fuses 電流額定值:0.5 A 電壓額定值:600 V 保險絲類型:Fast Acting 保險絲大小/組:Nano 尺寸:12.1 mm L x 4.5 mm W 安裝風格: 端接類型:SMD/SMT 系列:485
25C14X51GI 功能描述:保險絲 CYL 660vac 25A 14 x 51mm RoHS:否 制造商:Littelfuse 產品:Surface Mount Fuses 電流額定值:0.5 A 電壓額定值:600 V 保險絲類型:Fast Acting 保險絲大小/組:Nano 尺寸:12.1 mm L x 4.5 mm W 安裝風格: 端接類型:SMD/SMT 系列:485
25C14X51GI/I 功能描述:保險絲 Fuse,Cylinder w/indicator,14x51mm.25A,660V,gI RoHS:否 制造商:Littelfuse 產品:Surface Mount Fuses 電流額定值:0.5 A 電壓額定值:600 V 保險絲類型:Fast Acting 保險絲大小/組:Nano 尺寸:12.1 mm L x 4.5 mm W 安裝風格: 端接類型:SMD/SMT 系列:485
25C150BCGG5ZB 制造商:BOLTS 功能描述:
25C16 制造商:CATALYST 制造商全稱:Catalyst Semiconductor 功能描述:1K/2K/4K/8K/16K SPI Serial CMOS E2PROM