參數資料
型號: 101-0435
廠商: Rabbit Semiconductor
文件頁數: 55/100頁
文件大?。?/td> 0K
描述: MODULE RABBITCORE RCM2110
標準包裝: 1
系列: RabbitCore®
模塊/板類型: 單板計算機模塊
適用于相關產品: RCM2110
其它名稱: Q1220189
52
RabbitCore RCM2100
6.8 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. Instead of the MY_IP_ADDRESS and other macros, you will
see a TCPCONFIG macro. This macro tells Dynamic C to select your configuration from a
list of default configurations. You will have three choices when you encounter a sample
program with the TCPCONFIG macro.
1. You can replace the TCPCONFIG macro with individual MY_IP_ADDRESS,
MY_NETMASK
, MY_GATEWAY, and MY_NAMESERVER macros in each program.
2. You can leave TCPCONFIG at the usual default of 1, which will set the IP configurations
to 10.10.6.100, the netmask to 255.255.255.0, and the nameserver and gateway
to 10.10.6.1. If you would like to change the default values, for example, to use an IP
address of 10.1.1.2 for the RCM2100 board, and 10.1.1.1 for your PC, you can edit
the values in the section that directly follows the “General Configuration” comment in
the TCP_CONFIG.LIB library. You will find this library in the LIB/TCPIP directory.
3. You can create a CUSTOM_CONFIG.LIB library and use a TCPCONFIG value greater
than 100. Instructions for doing this are at the beginning of the TCP_CONFIG.LIB file.
There are some other “standard” configurations for TCPCONFIG that let you select differ-
ent features such as DHCP. Their values are documented at the top of the
TCP_CONFIG.LIB
library. More information is available in the Dynamic C TCP/IP
User’s Manual.
IP Addresses Before Dynamic C 7.30
Most of the sample programs such as shown in the example below use macros to define the
IP address assigned to the board and the IP address of the gateway, if there is a gateway.
#define MY_IP_ADDRESS "10.10.6.170"
#define MY_NETMASK "255.255.255.0"
#define MY_GATEWAY "10.10.6.1"
#define MY_NAMESERVER "10.10.6.1"
In order to do a direct connection, the following IP addresses can be used for the RCM2100:
#define MY_IP_ADDRESS "10.1.1.2"
#define MY_NETMASK "255.255.255.0"
// #define MY_GATEWAY "10.10.6.1"
// #define MY_NAMESERVER "10.10.6.1"
In this case, the gateway and nameserver are not used, and are commented out. The IP
address of the board is defined to be 10.1.1.2. The IP address of your PC can be defined
as 10.1.1.1.
相關PDF資料
PDF描述
101-0453 MODULE RABBITCORE RCM2300
101-0494 MODULE RABBITCORE RCM2250
101-0518 MODULE RABBITCORE RCM3110
101-0521 MODULE RABBITCORE RCM3210
101-0525 COMPUTER SINGLE-BOARD LP3500 FOX
相關代理商/技術參數
參數描述
101-0435-000 制造商:ITT Interconnect Solutions 功能描述:INSUL CA-KE18-4S RR / 101-0435-000 / Circular
101-0436 功能描述:模塊化系統 - SOM RCM2120 RABBITCORE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101-0437 功能描述:單板計算機 SR9205 16 in/8 out RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
10104389-12103LF 功能描述:DDR3 240P SMT ASSY 制造商:amphenol fci 系列:* 零件狀態:在售 標準包裝:28
10104389-13206LF 功能描述:240 Position DIMM DDR3 SDRAM Socket Surface Mount 制造商:amphenol fci 系列:10104389 包裝:帶卷(TR) 零件狀態:有效 連接器樣式:DIMM 針腳數:240 存儲器類型:DDR3 SDRAM 標準:MO-269 安裝類型:表面貼裝 特性:板鎖,鎖存器 安裝特性:正常,標準 - 頂部 觸頭鍍層:金 觸頭鍍層厚度:15μin(0.38μm) 標準包裝:1,680