- 您現在的位置：買賣IC網 > PDF目錄372904 > XE3314B Telecommunication IC PDF資料下載
參數資料
| 型號： | XE3314B |
| 英文描述： | Telecommunication IC |
| 中文描述： | 通信集成電路 |
| 文件頁數： | 9/17頁 |
| 文件大?。?/td> | 65K |
| 代理商： | XE3314B |
XECOM
(9)
XE3314B
%L - Read Received Signal Level -
AT%L
permits
the
user to read the magnitude of the receive signal in dBm.
%Q - Read Line Signal Quality -
AT%Q permits the user
to read the EQM value of the received signal.
\An - MNP Block Size -
AT|An sets the block size for MNP
data packets.
n=0
Maximum 64 characters
n=1
Maximum 128 characters
n=2
Maximum 192 characters
n=3
Maximum 256 characters*
\Bn -
Transmit Break - AT\Bn selects the duration of the
break signal sent. Break = n x 100 msec.
\Gn - Modem Port Flow Control -
n=0
No Modem Port Flow Control
n=1
XON/XOFF Port Flow Control
\Kn -
Break control - AT\Kn determines how the modem will
handle a break signal.
Break received from host with Reliable link.
n=0
Enter on-line command mode; do not transmit
break
n=1
Purge buffers, immediately transmit break
n=2
Same as n=0
n=3
Immediately send break
n=4
same as n=0
n=5
Send break in sequence with data*
Break received from host with Direct link .
n=0
Immediately transmit break, then enter on-line
command mode
n=1
Immediately send break
n=2
Enter command mode but do not transmit break
n=3
same as n=1
n=4
same as n=0
n=5
same as n=1*
Break received from modem w Normal link.
n=0
Purge buffers, Immediately send break to the host
n=1
same as n=0
n=2
Immediately send break to the host
n=3
Same as n=2
n=4
Send break in sequence with data.
n=5
Same as n=2*
Host initiates break on Reliable link.
n=0
Purge buffers and immediately transmit break
n=1
Same as n=0
n=2
Immediately transmit break
n=3
Same as n=1
n=4
Transmit break in sequence w data
n=5
Same as n=4
\Nn - Error Control Selection
- AT\Nn determines how the
modem will handle error control negotiations.
n=0
Normal mode, no error correction
n=1
Direct mode, no buffering, no error correction
n=2
Reliable mode, error correction required
n=3
V.42 Auto-reliable mode, accept either an error
controlled or non-error controlled link*
n=4
V.42 Reliable mode, LAPM required
n=5
MNP required
-Kn - MNP Extended Services -
AT-Kn determines how the
modem handles MNP10.
n=0
No LAPM to MNP10 conversion
n=1
LAPM to MNP10 conversion*
n=2
LAPM to MNP10 conversion but no MNP Ex-
tended Service during V.42 LAPM answer mode detect.
+MS - Select Modulation -
AT+MS sets the modulation and
available data rates in the format shown below.
AR+MS= a, b, c, d <CR>
a = modulation type
0 - V.21(300 BPS)
1 - V.22 (1200 BPS)
2 - V.22bis (2400 BPS)
3 - V.23 (1200 BPS Half Duplex)
9 - V.32 (9600 BPS)
10 - V.32bis (14,400 BPS)
11 - V.34bis (33,600 BPS)
64 - Bell 103 (300 BPS)
69 - Bell 212 (1200 BPS)
b = Automoce Selection
0 - Automode disabled
1 - Automode enabled
c = Minimum Data Rate in BPS
d = Maximum Data Rate in BPS
XE3314B AT Commands (continued)
相關PDF資料 |
PDF描述 |
|---|---|
| XE3314C | Telecommunication IC |
| XE3314L | Dual In-Line 2.75 in by 1.38 in by 0.42 in. |
| XE5052A | Microcontroller |
| XE5052 | Microcontroller |
| XE5200 | Microcontroller |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XE3314C | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| XE3314L | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Compact 33.6 KBPS Modem Module for Embedded Applications |
| XE332 | 制造商:Okaya Electric America Inc 功能描述: |
| XE332-Z | 制造商:OKAYA 制造商全稱:OKAYA 功能描述:NOISE SUPPRESSION CAPACITOR |
| XE333-Z | 制造商:OKAYA 制造商全稱:OKAYA 功能描述:NOISE SUPPRESSION CAPACITOR |
發布緊急采購，3分鐘左右您將得到回復。