• 參數資料
    型號: XCS05-5TQ240C
    廠商: Xilinx, Inc.
    英文描述: Spartan and Spartan-XL Families Field Programmable Gate Arrays
    中文描述: 斯巴達和Spartan - xL的家庭現場可編程門陣列
    文件頁數: 44/66頁
    文件大?。?/td> 809K
    代理商: XCS05-5TQ240C
    R
    Spartan and Spartan-XL Families Field Programmable Gate Arrays
    4-44
    DS060 (v1.5) March 2, 2000
    Spartan-XL Detailed Specifications
    Definition of Terms
    In the following tables, some specifications may be designated as Advance or Preliminary. These terms are defined as
    follows:
    Advance:
    Initial estimates based on simulation and/or extrapolation from other speed grades, devices, or device
    families. Values are subject to change. Use as estimates, not for production.
    Preliminary:
    Based on preliminary characterization. Further changes are not expected.
    Unmarked:
    Specifications not identified as either Advance or Preliminary are to be considered Final.
    Notwithstanding the definition of the above terms, all specifications are subject to change without notice.
    Except for pin-to-pin input and output parameters, the AC parameter delay specifications included in this document are
    derived from measuring internal test patterns. All specifications are representative of worst-case supply voltage and junction
    temperature conditions. The parameters included are common to popular designs and typical applications.
    Spartan-XL Absolute Maximum Ratings
    1
    Note
    1. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are
    stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under
    Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may
    affect device reliability.
    2: With 5V Tolerant I/Os selected, the Maximum DC overshoot must be limited to either +5.5 V or 10 mA and undershoot (below
    GND) must be limited to either 0.5 V or 10 mA, whichever is easier to achieve.
    3: With 5V Tolerant I/Os selected, the Maximum AC (during transitions) conditions are as follows; the device pins may
    undershoot to
    2.0 V or overshoot to + 7.0 V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing
    current no greater than 100 mA.
    4: Without 5V Tolerant I/Os selected, the Maximum DC overshoot or undershoot must be limited to either 0.5 V or 10 mA,
    whichever is easier to achieve.
    5: Without 5V Tolerant I/Os selected, the Maximum AC conditions are as follows; the device pins may undershoot to
    2.0 V or
    overshoot to V
    CC
    + 2.0 V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater
    than 100 mA.
    Spartan-XL Recommended Operating Conditions
    Notes:
    At junction temperatures above those listed as Operating Conditions, all delay parameters increase by 0.35% per
    °
    C.
    Input and output measurement threshold is ~50% of V
    CC
    .
    Symbol
    V
    CC
    Description
    Value
    0.5 to 4.0
    0.5 to 5.5
    0.5 to V
    CC
    + 0.5
    0.5 to 5.5
    0.5 to V
    CC
    + 0.5
    50
    65 to +150
    +260
    +125
    Units
    V
    V
    V
    V
    V
    ms
    °
    C
    °
    C
    °
    C
    Supply voltage relative to GND
    V
    IN
    Input voltage relative to GND (Note 2, 3, 4,
    5)
    5V Tolerant I/O Checked
    2, 3
    Not 5V Tolerant I/Os
    4, 5
    5V Tolerant I/O Checked
    2, 3
    Not 5V Tolerant I/Os
    4, 5
    V
    TS
    Voltage applied to 3-state output (Note 2,
    3, 4, 5)
    V
    CCt
    T
    STG
    T
    SOL
    T
    J
    Longest supply voltage rise time from 1V to 3V
    Storage temperature (ambient)
    Maximum soldering temperature (10 s @ 1/16 in. = 1.5 mm)
    Junction temperature
    Plastic packages
    Symbol
    Description
    Min
    Max
    Units
    V
    CC
    Supply voltage relative to GND, T
    J
    = 0
    °
    C to +85
    °
    C
    Supply voltage relative to GND, T
    J
    =
    40
    °
    C to
    +100
    °
    C
    Commercial
    3.0
    3.6
    V
    Industrial
    3.0
    3.6
    V
    V
    IH
    V
    IL
    T
    IN
    High-level input voltage
    50% of V
    CC
    0
    5.5
    V
    Low-level input voltage
    30% of V
    CC
    250
    V
    Input signal transition time
    ns
    Powered by ICminer.com Electronic-Library Service CopyRight 2003
    相關PDF資料
    PDF描述
    XCS05XL-3BG208I Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05XL-3BG240C Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05XL-3BG240I Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05XL-3BG256C Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05XL-3BG256I Spartan and Spartan-XL Families Field Programmable Gate Arrays
    相關代理商/技術參數
    參數描述
    XCS05-5TQ240I 制造商:XILINX 制造商全稱:XILINX 功能描述:Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05-5TQ256C 制造商:XILINX 制造商全稱:XILINX 功能描述:Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05-5TQ256I 制造商:XILINX 制造商全稱:XILINX 功能描述:Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05-5TQ280C 制造商:XILINX 制造商全稱:XILINX 功能描述:Spartan and Spartan-XL Families Field Programmable Gate Arrays
    XCS05-5TQ280I 制造商:XILINX 制造商全稱:XILINX 功能描述:Spartan and Spartan-XL Families Field Programmable Gate Arrays