參數資料
| 型號： | X9C503SZT1 |
| 廠商： | Intersil |
| 文件頁數： | 1/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC XDCP 100-TAP 50K EE 8-SOIC |
| 產品培訓模塊： | Digitally Controlled Potentiometers |
| 標準包裝： | 2,500 |
| 系列： | XDCP™ |
| 接片： | 100 |
| 電阻（歐姆）： | 50k |
| 電路數： | 1 |
| 溫度系數： | 標準值 ±300 ppm/°C |
| 存儲器類型： | 非易失 |
| 接口： | 3 線串行（芯片選擇，遞增，增/減） |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 帶卷 (TR) |
1
FN8222.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005, 2006, 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
X9C102, X9C103, X9C104, X9C503
Digitally Controlled Potentiometer
(XDCP)
The X9C102, X9C103, X9C104, X9C503 are Intersils’
digitally controlled (XDCP) potentiometers. The device
consists of a resistor array, wiper switches, a control section,
and non-volatile memory. The wiper position is controlled by
a three-wire interface.
The potentiometer is implemented by a resistor array
composed of 99 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in non-volatile
memory and then be recalled upon a subsequent power-up
operation.
The device can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of
applications ranging from control to signal processing to
parameter adjustment.
Pinout
X9C102, X9C103, X9C104, X9C503
(8 LD SOIC, 8 LD PDIP)
TOP VIEW
Features
Solid-State Potentiometer
Three-Wire Serial Interface
100 Wiper Tap Points
- Wiper Position Stored in Non-volatile Memory and
Recalled on Power-up
99 Resistive Elements
- Temperature Compensated
- End-to-End Resistance, ±20%
- Terminal Voltages, ±5V
Low Power CMOS
-VCC = 5V
- Active Current, 3mA max.
- Standby Current, 750A max.
High Reliability
- Endurance, 100,000 Data Changes per Bit
- Register Data Retention, 100 years
X9C102 = 1k
Ω
X9C103 = 10k
Ω
X9C503 = 50k
Ω
X9C104 = 100k
Ω
Packages
- 8 Ld SOIC
- 8 Ld PDIP
Pb-Free Available (RoHS Compliant)
Block Diagram
VCC
CS
VL/RL
VW/RW
INC
U/D
VH/RH
VSS
1
2
3
4
8
7
6
5
7-BIT
UP/DOWN
COUNTER
7-BIT
NON-VOLATILE
MEMORY
STORE AND
RECALL
CONTROL
CIRCUITRY
ONE
OF
HUNDRED
DECODER
RESISTOR
ARRAY
RL/VL
RW/VW
RH/VH
U/D
INC
CS
TRANSFER
VCC
ONE-
GATES
99
98
97
96
2
1
0
GND
UP/DOWN
(INC)
INCREMENT
DEVICE
(U/D)
(CS)
VCC (SUPPLY VOLTAGE)
VSS (GROUND)
CONTROL
AND
MEMORY
GENERAL
VH/RH
RW/VW
VL/RL
SELECT
DETAILED
Data Sheet
July 20, 2009
相關PDF資料 |
PDF描述 |
|---|---|
| VE-B4B-MV | CONVERTER MOD DC/DC 95V 150W |
| MS3106E32-7P | CONN PLUG 35POS STRAIGHT W/PINS |
| VE-2TV-MW | CONVERTER MOD DC/DC 5.8V 100W |
| VI-JT1-MZ-S | CONVERTER MOD DC/DC 12V 25W |
| VE-2TT-MW | CONVERTER MOD DC/DC 6.5V 100W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9CVCAMP01 | 制造商:3M Electronic Products Division 功能描述:KE727054782 TRASP CONSUMABLE SAMPLING RED X9CVCAMP01 |
| X9DAX-IF-B | 制造商:Supermicro Computer Inc 功能描述:X9DAX-IF MOTHERBOARD (BULK) - Bulk |
| X9DAX-IF-O | 制造商:Supermicro Computer Inc 功能描述:X9DAX-IF MOTHERBOARD (SINGLE) - Bulk |
| X9DBL-I-O | 制造商:Supermicro Computer Inc 功能描述:MOTHERBOARD X9DBL-I-SINGLE - Bulk |
| X9DRD-7JLN4F-B | 制造商:Supermicro Computer Inc 功能描述:MOTHERBOARD X9DRD-7JLN4F, BULK - Bulk |
發(fā)布緊急采購，3分鐘左右您將得到回復。