- 您現在的位置：買賣IC網 > PDF目錄376449 > X98017L128-3.3 (INTERSIL CORP) GIGATRUE 550 CAT PATCH CABLE NO BOOT 20FT BLACK PDF資料下載
參數資料
| 型號： | X98017L128-3.3 |
| 廠商： | INTERSIL CORP |
| 元件分類： | 消費家電 |
| 英文描述： | GIGATRUE 550 CAT PATCH CABLE NO BOOT 20FT BLACK |
| 中文描述： | SPECIALTY CONSUMER CIRCUIT, PQFP128 |
| 封裝： | 14 X 20 MM, MS-022, MQFP-128 |
| 文件頁數： | 19/29頁 |
| 文件大小： | 295K |
| 代理商： | X98017L128-3.3 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁當前第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁
19
FN8218.0
June 6, 2005
Table 3 shows the corner frequency for different register
settings.
Register 0x0D[7:4] controls a programmable zero, allowing
high frequencies to be boosted, restoring some of the
harmonics lost due to excessive EMI filtering, cable losses, etc.
This control has a very large range, and can introduce high
frequency noise into the image, so it should be used judiciously,
or as an advanced user adjustment.
Table 4 shows the corner frequency of the zero for different
peaking register settings.
Offset DAC
The X98017 features a 10 bit Digital-to-Analog Converter
(DAC) to provide extremely fine control over the full channel
offset. The DAC is placed after the PGA to eliminate
interaction between the PGA (controlling “contrast”) and the
Offset DAC (controlling “brightness”).
In normal operation, the Offset DAC is controlled by the
ABLC circuit, ensuring that the offset is always reduced
to sub-LSB levels (See the following ABLC section for
more information). When ABLC is enabled, the Offset
registers (0x09, 0x0A, 0x0B) control a digital offset added
to or subtracted from the output of the ADC. This mode
provides the best image quality and eliminates the need for
any offset calibration.
If desired, ABLC can be disabled (0x17[0]=1) and the
Offset DAC programmed manually, with the 8 most
significant bits in registers 0x09, 0x0A, 0x0B, and the 2 least
significant bits in register 0x0C[7:2].
The default Offset DAC range is ±127 ADC LSBs. Setting
0x0C[0]=1 reduces the swing of the Offset DAC by 50%,
making 1 Offset DAC LSB the weight of 1/8th of an ADC
LSB. This provides the finest offset control and applies to
both ABLC and manual modes.
Automatic Black Level Compensation (ABLC)
ABLC is a function that continuously removes all offset
errors from the incoming video signal by monitoring the
offset at the output of the ADC and servoing the 10 bit
analog DAC to force those errors to zero. When ABLC is
enabled, the user offset control is a digital adder, with 8 bit
resolution (See Table 5).
When the ABLC function is enabled (0x17[0]=0), the ABLC
function is executed every line after the trailing edge of
HSYNC. If register 0x05[5] = 0 (the default), the ABLC
function will not be triggered while the DPLL is coasting,
preventing any composite sync edges, equalization pulses,
or Macrovision signals from corrupting the black data and
potentially adding a small error in the ABLC accumulator.
After the trailing edge of HSYNC, the start of ABLC is delayed
by the number of pixels specified in registers 0x14 and 0x15.
After that delay, the number of pixels specified by register
0x17[3:2] are averaged together and added to the ABLC’s
accumulator. The accumulator stores the average black levels
for the number of lines specified by register 0x17[6:4], which
is then used to generate a 10 bit DAC value.
The default values provide excellent results with offset
stability and absolute accuracy better than 1 ADC LSB for
most input signals. Increasing the ABLC pixel width or the
ABLC bandwidth settings decreases the ABLC’s absolute
DC error further.
ADC
The X98017 features 3 fully differential, 170MSPS 8 bit
ADCs.
TABLE 3. BANDWIDTH CONTROL
0x0D[3:0] VALUE
(LSB = “x” = “don’t care”)
AFE BANDWIDTH
000x
100MHz
001x
130MHz
010x
150MHz
011x
180MHz
100x
230MHz
101x
320MHz
110x
480MHz
111x
780MHz
TABLE 4. PEAKING CORNER FREQUENCIES
0X0D[7:4] VALUE
ZERO CORNER FREQUENCY
0x0
Peaking disabled
0x1
800MHz
0x2
400MHz
0x3
265MHz
0x4
200MHz
0x5
160MHz
0x6
135MHz
0x7
115MHz
0x8
100MHz
0x9
90MHz
0xA
80MHz
0xB
70MHz
0xC
65MHz
0xD
60MHz
0xE
55MHz
0xF
50MHz
X98017
相關PDF資料 |
PDF描述 |
|---|---|
| X98017L128-3.3-Z | GIGATRUE 550 CAT PATCH CBL NO BOOT 20FT BK 25 PK |
| X98021 | 210MHz Triple Video Digitizer with Digital PLL |
| X98021L128-3.3 | 210MHz Triple Video Digitizer with Digital PLL |
| X98021L128-3.3-Z | 210MHz Triple Video Digitizer with Digital PLL |
| X98024 | 240MHz Triple Video Digitizer with Digital PLL |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X98021 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:210MHz Triple Video Digitizer with Digital PLL |
| X98021_06 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:210MHz Triple Video Digitizer with Digital PLL |
| X98021EVAL | 制造商:Intersil Corporation 功能描述:EVALUATION BOARD FOR X98021 - Bulk |
| X98021L128-3.3 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:210MHz Triple Video Digitizer with Digital PLL |
| X98021L128-3.3-Z | 功能描述:IC TRPL VID DIGITIZER 128MQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 標準包裝:250 系列:- 類型:電平移位器 應用:LCD 電視機/監控器 安裝類型:表面貼裝 封裝/外殼:28-WFQFN 裸露焊盤 供應商設備封裝:28-WQFN（4x4）裸露焊盤 包裝:帶卷 (TR) 其它名稱:296-32523-2TPS65198RUYT-ND |
發布緊急采購，3分鐘左右您將得到回復。