參數資料
型號： X9430WV24-2.7
元件分類： 數字電位計
英文描述： Dual Digitally Controlled Potentiometer (XDCP⑩) with Operational Amplifier
中文描述： 雙數字電位器（數字電位器⑩）的運算放大器
文件頁數： 7/21頁
文件大小： 881K
代理商： X9430WV24-2.7
X9430
– Preliminary Information
Characteristics subject to change without notice.
7 of 21
REV 1.0 6/20/00
www.xicor.com
Figure 7. Increment/Decrement Timing
SCK
SI
V
W
INC/DEC CMD Issued
t
WRID
V
OUT
REGISTER OPERATION
Both digitally controlled potentiometers share the serial
interface and share a common architecture. Each
potentiometer is associated with a wiper counter regis-
ter (WCR), and four data registers. Figure 8 illustrates
the control, registers, and system features of the
device.
Figure 8. System Block Diagram
Wiper Counter (WCR) and Analog Control
Registers (ACR)
The X9430 contains two wiper counter registers, one
for each XDCP. The wiper counter register is equivalent
to a serial-in, parallel-out counter with its outputs
decoded to select one of sixty-four switches along its
resistor array. The contents of the wiper counter register
can be altered in four ways: it may be written directly by
the host via the write WCR instruction (serial load); it
may be written indirectly by transferring the contents of
one of four associated data registers (DR) via the XFR
data register instruction (parallel load); it can be modi-
fied one step at a time by the increment/decrement
instruction (WCR only). Finally, it may be loaded with
the contents of its associated data register zero (R0)
upon power-up.
The wiper counter register is a volatile register; that is,
its contents are lost when the X9430 is powered-down.
Although the registers are automatically loaded with
the value in R0 upon power-up, it should be noted this
may be different from the value present at power-down.
Data Registers (DR)
Each potentiometer has four nonvolatile data registers
(DR). These can be read or written directly by the host
and data can be transferred between any of the four
data registers and the WCR. It should be noted all
operations changing data in one of these registers is a
nonvolatile operation and will take a maximum of 10ms.
If the application does not require storage of multiple set-
tings for the potentiometer, these registers can be used
as regular memory locations that could store system
parameters or user preference data.
V
OUT (0,1)
(DR0-DR3)
0,1
Control and
Memory
WCR0
CS
SCK
SO
SI
A1
A0
V
H (0,1)
V
L (0,1)
WP
V
W (0,1)
V
INV (0,1)
V
N (0,1)
+
–
WCR
0,1
V
SS
V
CC
HOLD
WCR1
Detailed Block Diagram
相關PDF資料
PDF描述
X9430WV24I Hall Effect Switch IC; Package/Case:3-SOT-23; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Sensitivity:5 mV/G; Mounting Type:Surface Mount RoHS Compliant: Yes
X9430WV24I-2.7 Dual Digitally Controlled Potentiometer (XDCP⑩) with Operational Amplifier
X9430WV24M2.7 Interface IC
X9430WS24M Interface IC
X9430WS24M2.7 Interface IC
相關代理商/技術參數
參數描述
X9430WV24I 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Dual Digitally Controlled Potentiometer (XDCP⑩) with Operational Amplifier
X9430WV24I-2.7 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Dual Digitally Controlled Potentiometer (XDCP⑩) with Operational Amplifier
X9430WV24M 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Interface IC
X9430WV24M2.7 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Interface IC
X9438 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*