- 您現在的位置：買賣IC網 > PDF目錄371302 > X9428WS-2.7 (INTERSIL CORP) Single Digitally Controlled Potentiometer PDF資料下載
參數資料
| 型號： | X9428WS-2.7 |
| 廠商： | INTERSIL CORP |
| 元件分類： | 數字電位計 |
| 英文描述： | Single Digitally Controlled Potentiometer |
| 中文描述： | 10K DIGITAL POTENTIOMETER, 2-WIRE SERIAL CONTROL INTERFACE, 64 POSITIONS, PDSO16 |
| 封裝： | 0.300 INCH, PLASTIC, SOIC-16 |
| 文件頁數： | 8/20頁 |
| 文件大小： | 580K |
| 代理商： | X9428WS-2.7 |
X9428
Characteristics subject to change without notice.
8 of 20
REV 1.1.5 7/8/03
www.xicor.com
DETAILED OPERATION
The potentiometer has a Wiper Counter Register and
four Data Registers. A detailed discussion of the
register organization and array operation follows.
Wiper Counter Register
The X9428 contains a Wiper Counter Register. The
Wiper Counter Register can be envisioned as a 6-bit
parallel and serial load counter with its outputs
decoded to select one of sixty-four switches along its
resistor array. The contents of the WCR can be altered
in four ways: it may be written directly by the host via
the write Wiper Counter Register instruction (serial
load); it may be written indirectly by transferring the
contents of one of four associated Data Registers via
the XFR Data Register instruction (parallel load); it can
be modified one step at a time by the Increment/
Decrement instruction. Finally, it is loaded with the
contents of its Data Register zero (DR0) upon power-
up.
The WCR is a volatile register; that is, its contents are
lost when the X9428 is powered-down. Although the
register is automatically loaded with the value in DR0
upon power-up, it should be noted this may be different
from the value present at power-down.
Data Registers
The potentiometer has four nonvolatile Data Registers.
These can be read or written directly by the host and
data can be transferred between any of the four Data
Registers and the Wiper Counter Register. It should be
noted all operations changing data in one of these
registers is a nonvolatile operation and will take a
maximum of 10ms.
If the application does not require storage of multiple
settings for the potentiometer, these registers can be
used as regular memory locations that could possibly
store system parameters or user preference data.
Register Descriptions
Data Registers, (6-Bit), Nonvolatile
D5
D4
NV
NV
(MSB)
Four 6-bit Data Registers for each XDCP. (eight 6-bit
registers in total).
– {D5~D0}: These bits are for general purpose not
volatile data storage or for storage of up to four
different wiper values. The contents of Data Register
0 are automatically moved to the Wiper Counter
Register on power-up.
Wiper Counter Register, (6-Bit), Volatile
WP5
WP4
WP3
V
V
(MSB)
One 6-bit wiper counter register for each XDCP. (Four
6-bit registers in total.)
– {D5~D0}: These bits specify the wiper position of the
respective XDCP. The Wiper Counter Register is
loaded on power-up by the value in Data Register 0.
The contents of the WCR can be loaded from any of
the other Data Register or directly. The contents of
the WCR can be saved in a DR.
D3
NV
D2
NV
D1
NV
D0
NV
(LSB)
WP2
V
WP1
V
WP0
V
(LSB)
V
相關PDF資料 |
PDF描述 |
|---|---|
| X9428WP-2.7 | Single Digitally Controlled Potentiometer |
| X9428YVI | Single Digitally Controlled Potentiometer |
| X9430 | LINEAR HALL EFFECT SENSOR W/TIN PLATING |
| X9430WS24 | LINEAR HALL EFFECT SENSOR W/TIN PLATING |
| X9430WS24-2.7 | Dual Digitally Controlled Potentiometer (XDCP⑩) with Operational Amplifier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9428WSI | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Single Digitally Controlled Potentiometer |
| X9428WSI-2.7 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Single Digitally Controlled Potentiometer |
| X9428WSM | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC |
| X9428WSM2.7 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC |
| X9428WV | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Single Digitally Controlled Potentiometer |
發布緊急采購，3分鐘左右您將得到回復。