參數資料
型號： X9251UV24IZ
廠商： INTERSIL CORP
元件分類： 數字電位計
英文描述： SCR Thyristor; Thyristor Type:Standard Gate; Peak Repetitive Off-State Voltage, Vdrm:400V; On State RMS Current, IT(rms):55A; Peak Non Repetitive Surge Current, Itsm:700A; Gate Trigger Current Max, Igt:35mA RoHS Compliant: Yes
中文描述： QUAD 50K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256 POSITIONS, PDSO24
封裝： 4.40 MM, ROHS COMPLIANT, TSSOP-24
文件頁數： 7/25頁
文件大小： 549K
代理商： X9251UV24IZ
X9251
Characteristics subject to change without notice.
7 of 25
REV 1.3.3 2/10/04
www.xicor.com
Wiper Counter Register (WCR)
The X9251 contains four Wiper Counter Registers, one
for each potentiometer. The Wiper Counter Register
can be envisioned as a 8-bit parallel and serial load
counter with its outputs decoded to select one of 256
wiper positions along its resistor array. The contents of
the WCR can be altered in four ways: it may be written
directly by the host via the Write Wiper Counter
Register instruction (serial load); it may be written
indirectly by transferring the contents of one of four
associated data registers via the XFR Data Register
instruction (parallel load); it can be modified one step
at a time by the Increment/Decrement instruction (see
Instruction section for more details). Finally, it is loaded
with the contents of its Data Register zero (DR#0)
upon power-up. (See Figure 1.)
The wiper counter register is a volatile register; that is,
its contents are lost when the X9251 is powered-down.
Although the register is automatically loaded with the
value in DR#0 upon power-up, this may be different
from the value present at power-down. Power-up
guidelines are recommended to ensure proper
loadings of the DR#0 value into the WCR#.
Data Registers (DR)
Each of the four DCPs has four 8-bit non-volatile Data
Registers. These can be read or written directly by the
host. Data can also be transferred between any of the
four Data Registers and the associated Wiper Counter
Register. All operations changing data in one of the
Data Registers is a non-volatile operation and takes a
maximum of 10ms.
If the application does not require storage of multiple
settings for the potentiometer, the Data Registers can
be used as regular memory locations for system
parameters or user preference data.
Bits [7:0] are used to store one of the 256 wiper
positions or data (0~255).
Status Register (SR)
This 1-bit Status Register is used to store the system
status.
WIP: Write In Progress status bit, read only.
– When WIP=1, indicates that high-voltage write cycle
is in progress.
– When WIP=0, indicates that no high-voltage write
cycle is in progress.
Table 1. Wiper counter Register, WCR (8-bit), WCR[7:0]:
Used to store the current wiper position (Volatile).
Table 2. Data Register, DR (8-bit), DR[7:0]:
Used to store wiper positions or data (Non-volatile).
WCR7
(MSB)
WCR6
WCR5
WCR4
WCR3
WCR2
WCR1
WCR0
(LSB)
Bit 7
(MSB)
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
(LSB)
相關PDF資料
PDF描述
X9251UV24IZ-2.7 SCR Thyristor; Thyristor Type:Standard Gate; Peak Repetitive Off-State Voltage, Vdrm:600V; On State RMS Current, IT(rms):55A; Peak Non Repetitive Surge Current, Itsm:700A; Gate Trigger Current Max, Igt:35mA RoHS Compliant: Yes
X9251UV24Z-2.7 OSC 5V SMT PLAS 14X9 CMOS
X9251TV24Z-2.7 OSC 5V SMT PLAS 14X9 CMOS
X9251TV24I-2.7 Single Supply/Low Power/256-Tap/SPI Bus
X9251TV24-2.7 Single Supply/Low Power/256-Tap/SPI Bus
相關代理商/技術參數
參數描述
X9251UV24IZ-2.7 功能描述:數字電位計 IC QD DCP 50KOHM 256 TAPS SPI RoHS:否 制造商:Maxim Integrated 電阻:200 Ohms 溫度系數:35 PPM / C 容差:25 % POT 數量:Dual 每 POT 分接頭:256 弧刷存儲器:Volatile 緩沖刷: 數字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作電源電壓:1.7 V to 5.5 V 電源電流:27 uA 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:TQFN-16 封裝:Reel
X9251UV24IZ-2.7T1 功能描述:IC XDCP QUAD 256TP 50K 24-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:256 電阻（歐姆）:100k 電路數:2 溫度系數:標準值 35 ppm/°C 存儲器類型:易失 接口:6 線串行（芯片選擇，遞增，增/減） 電源電壓:2.6 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR)
X9251UV24Z 功能描述:IC XDCP QUAD 256TAP 50K 24-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:256 電阻（歐姆）:100k 電路數:2 溫度系數:標準值 35 ppm/°C 存儲器類型:易失 接口:6 線串行（芯片選擇，遞增，增/減） 電源電壓:2.6 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR)
X9251UV24Z-2.7 功能描述:IC XDCP QUAD 256TAP 50K 24-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:256 電阻（歐姆）:100k 電路數:2 溫度系數:標準值 35 ppm/°C 存儲器類型:易失 接口:6 線串行（芯片選擇，遞增，增/減） 電源電壓:2.6 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR)
X9252 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Low Power + Quad 256-Tap + 2-Wire Bus + Up/Down Interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*