- 您現在的位置：買賣IC網 > PDF目錄371281 > X9251US24-2.7 (INTERSIL CORP) Triac; Thyristor Type:Snubberless; Peak Repetitive Off-State Voltage, Vdrm:800V; On State RMS Current, IT(rms):8A; Gate Trigger Current (QI), Igt:50mA; Current, It av:8A; Gate Trigger Current Max, Igt:50mA RoHS Compliant: Yes PDF資料下載
參數資料
| 型號： | X9251US24-2.7 |
| 廠商： | INTERSIL CORP |
| 元件分類： | 數字電位計 |
| 英文描述： | Triac; Thyristor Type:Snubberless; Peak Repetitive Off-State Voltage, Vdrm:800V; On State RMS Current, IT(rms):8A; Gate Trigger Current (QI), Igt:50mA; Current, It av:8A; Gate Trigger Current Max, Igt:50mA RoHS Compliant: Yes |
| 中文描述： | QUAD 50K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256 POSITIONS, PDSO24 |
| 封裝： | 0.300 INCH, PLASTIC, SOIC-24 |
| 文件頁數： | 5/25頁 |
| 文件大小： | 549K |
| 代理商： | X9251US24-2.7 |
X9251
Characteristics subject to change without notice.
5 of 25
REV 1.3.3 2/10/04
www.xicor.com
PIN DESCRIPTIONS
Bus Interface Pins
S
ERIAL
O
UTPUT
(SO)
SO is a serial data output pin. During a read cycle,
data is shifted out on this pin. Data is clocked out by
the falling edge of the serial clock.
S
ERIAL
I
NPUT
(SI)
SI is the serial data input pin. All opcodes, byte
addresses and data to be written to the device
registers are input on this pin. Data is latched by the
rising edge of the serial clock.
S
ERIAL
C
LOCK
(SCK)
The SCK input is used to clock data into and out of the
X9251.
H
OLD
(HOLD)
HOLD is used in conjunction with the CS pin to select
the device. Once the part is selected and a serial
sequence is underway, HOLD may be used to pause
the serial communication with the controller without
resetting the serial sequence. To pause, HOLD must
be brought LOW while SCK is LOW. To resume
communication, HOLD is brought HIGH, again while
SCK is LOW. If the pause feature is not used, HOLD
should be held HIGH at all times.
D
EVICE
A
DDRESS
(A1–A0)
The address inputs are used to set the two least
significant bits of the slave address. A match in the
slave address serial data stream must be made with
the address input in order to initiate communication
with the X9251. Device pins A1-A0 must be tie to a
logic level which specify the internal address of the
device, see Figures 2, 3, 4, 5 and 6.
C
HIP
S
ELECT
(CS)
When CS is HIGH, the X9251 is deselected and the
SO pin is at high impedance, and (unless an internal
write cycle is underway) the device is in the standby
state. CS LOW enables the X9251, placing it in the
active power mode. It should be noted that after a
power-up, a HIGH to LOW transition on CS is required
prior to the start of any operation.
Potentiometer Pins
R
H
, R
L
The R
H
and R
L
pins are equivalent to the terminal
connections on a mechanical potentiometer. Since
there are 4 potentiometers, there are 4 sets of R
H
and
R
L
such that R
H0
and R
L0
are the terminals of DCP0
and so on.
R
W
The wiper pin are equivalent to the wiper terminal of a
mechanical
potentiometer.
potentiometers, there are 4 sets of R
W
such that R
W0
is the terminals of DCP0 and so on.
Since
there
are
4
Supply Pins
S
YSTEM
S
UPPLY
V
OLTAGE
(V
CC
)
AND
S
UPPLY
G
ROUND
(V
SS
)
The V
CC
pin is the system supply voltage. The V
SS
pin
is the system ground.
Other Pins
N
O
C
ONNECT
No connect pins should be left floating. This pins are
used for Xicor manufacturing and testing purposes.
H
ARDWARE
W
RITE
P
ROTECT
I
NPUT
(WP)
The WP pin when LOW prevents non-volatile writes to
the Data Registers.
相關PDF資料 |
PDF描述 |
|---|---|
| X9251US24I | Triac; Thyristor Type:Logic Level; Peak Repetitive Off-State Voltage, Vdrm:800V; On State RMS Current, IT(rms):8A; Gate Trigger Current (QI), Igt:10mA; Current, It av:8A; Gate Trigger Current Max, Igt:10mA RoHS Compliant: Yes |
| X9251US24I-2.7 | Triac; Thyristor Type:Snubberless; Peak Repetitive Off-State Voltage, Vdrm:1000V; On State RMS Current, IT(rms):12A; Gate Trigger Current (QI), Igt:50mA; Current, It av:12A; Gate Trigger Current Max, Igt:50mA RoHS Compliant: Yes |
| X9251TV24IZ-2.7 | Single Supply/Low Power/256-Tap/SPI Bus |
| X9252YV24-2.7 | Hook-Up Wire; Conductor Size AWG:24; No. Strands x Strand Size:19 x 36; Jacket Color:Brown; Approval Bodies:UL; Approval Categories:UL AWM Style 1180; Passes VW-1 Flame Test; Cable/Wire MIL SPEC:MIL-W-16878/5 Type EE RoHS Compliant: Yes |
| X9252UV24I-2.7 | Quad Digitally-Controlled (XDCP) potentiometer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9251US24I | 功能描述:IC DCP QUAD 50K 256TP 24SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9251US24I-2.7 | 功能描述:IC DCP QUAD 50K 256TP 24SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9251US24I-2.7T1 | 功能描述:IC XDCP QUAD 256TAP 50K 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9251US24IT1 | 功能描述:IC XDCP QUAD 256TAP 50K 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9251US24IZ | 功能描述:IC XDCP QUAD 256TAP 50K 24-SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:256 電阻（歐姆）:100k 電路數:2 溫度系數:標準值 35 ppm/°C 存儲器類型:易失 接口:6 線串行（芯片選擇，遞增，增/減） 電源電壓:2.6 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。