- 您現在的位置：買賣IC網 > PDF目錄372531 > X24F064 SerialFlash Memory with Block Lock Protection(2線接口，塊鎖定保護,串行快擦寫存儲器) PDF資料下載
參數資料
| 型號： | X24F064 |
| 英文描述： | SerialFlash Memory with Block Lock Protection(2線接口，塊鎖定保護,串行快擦寫存儲器) |
| 中文描述： | SerialFlash內存區塊可鎖定的保護（2線接口，塊鎖定保護，串行快擦寫存儲器） |
| 文件頁數： | 6/20頁 |
| 文件大小： | 155K |
| 代理商： | X24F064 |
X24F064/032/016
6
Flow 1. ACK Polling Sequence
After the receipt of each byte, the five low order ad-
dress bits are internally incremented by one. The high
order bits of the sector address remain constant. If the
master should transmit more or less than 32 bytes prior
to generating the stop condition, the contents of the
sector cannot be guaranteed. All inputs are disabled
until completion of the internal program cycle. Refer to
Figure 5 for the address, acknowledge and data trans-
fer sequence.
Acknowledge Polling
The Max Write Cycle Time can be significantly reduced
using Acknowledge Polling. To initiate Acknowledge
Polling, the master issues a start condition followed by
the Slave Address Byte for a write or read operation. If
the device is still busy with the high voltage cycle, then
no ACK will be returned. If the device has completed
the write operation, an ACK will be returned and the
host can then proceed with the read or write operation.
Refer to Flow 1.
READ OPERATIONS
Read operations are initiated in the same manner as
program operations with the exception that the R/W bit
of the slave address is set HIGH. There are three basic
read operations: current address read, random read
and sequential read.
It should be noted that the ninth clock cycle of the read
operation is not a “don’t care.” To terminate a read op-
eration, the master must either issue a stop condition
during the ninth cycle or hold SDA HIGH during the
ninth clock cycle and then issue a stop condition.
6686 ILL F09.1
PROGRAM OPERATION
COMPLETED
ENTER ACK POLLING
ISSUE
START
ISSUE SLAVE
ADDRESS AND R/W = 0
ACK
RETURNED
NEXT
OPERATION
A WRITE
ISSUE SECTOR
ADDRESS
PROCEED
ISSUE STOP
NO
YES
YES
PROCEED
ISSUE STOP
NO
相關PDF資料 |
PDF描述 |
|---|---|
| X24F128 | 2-Wire SerialFlash with Block Lock Protection(2線接口，塊鎖定保護,串行快擦寫存儲器) |
| X25020(中文) | SPI Serial EEPROM with Block Lock Protection(帶塊鎖定保護的SPI串行EEPROM) |
| X25021PI-2.7 | SPI Serial E2PROM with Block LockTM Protection |
| X25021SI-2.7 | SPI Serial E2PROM with Block LockTM Protection |
| X25021SI-3 | SPI Serial E2PROM with Block LockTM Protection |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X24F064P | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:SerialFlash TM Memory with Block Lock TM Protection |
| X24F064P-5 | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:SerialFlash TM Memory with Block Lock TM Protection |
| X24F064PE | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:SerialFlash TM Memory with Block Lock TM Protection |
| X24F064PE-5 | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:SerialFlash TM Memory with Block Lock TM Protection |
| X24F064PI | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:SerialFlash TM Memory with Block Lock TM Protection |
發布緊急采購，3分鐘左右您將得到回復。