參數資料
型號： W921C840
英文描述： Microcontroller
中文描述： 微控制器
文件頁數： 25/53頁
文件大?。?/td> 394K
代理商： W921C840
W921E400A/W921C400
Publication Release Date: July 1999
- 25 -
Revision A3
The format of the TM0 control register (TM0CR) is described below:
TM0CR register: (address = 020H, default data = 0H)
b3
b2
b1
b0
b1
b0
Input frequency (f )
0
0
0
1
1
0
1
1
fsys/2 Hz
fsys/256 Hz
fsys/1024 Hz
fsys/2048 Hz
Reserved
Reserved
The TM0 set register is divided into TM0 MSB data register (TM0MSB register, address = 021H,
default = 0FH) and TM0 LSB data register (TM0LSB register, address = 022H, default = 0FH).
TM0 will underflow when TM0 set register is from 00H to 0FFH and the value in the TM0MSB and
TM0LSB will be auto reloaded to the TM0 set register when the STTM0 bit2 is set. TM0 will decrease
by 1 at the frequency of timer 0 clock after the timer 0 has started.
If at any time the STTM0 bit3 is from 0 to 1 (disable to enable) in the timer mode, the TM0MSB and
TM0LSB will be auto reloaded to the TM0 set register again and restart the timer 0. TM0 will stop
operating while the STTM0 bit3 is reset to 0.
The TM0 starts to count when the STTM0 register bit3 is set. When TM0 underflows, the STTM0 bit3
will be reset by hardware to stop TM0 if the auto-reload is disabled, but the STTM0 bit3 will not be
reset if the auto-reload is enabled.
When the TM0 normal function is performed, the watch-dog timer function will be disabled
automatically.
The format of the TM0 status register (STTM0) is described below:
STTM0 register: (address = 023H, default data = 0H)
b3
b2
b1
b0
0:TM0 stop
1:TM0 start
0:TM0 normal function selected
1:Watch-dog timer (WDT) selected
0:WDT not underflow
1:WDT underflow
0:TM0 auto-reload disable
1:TM0 auto-reload enable
If TM0 works as the watch-dog timer (WDT), the bit1 of the STTM0 register will be set when the WDT
is underflow, in the meanwhile, the system is reset just as with the power on reset except the STTM0
bit1. The WDT (STTM0 bit1) will be reset to zero only with power on reset or RAM write mode.
In the timer mode the time out will be the programming data subtract 1 ([TM0MSB, TM0LSB]-1). TM2
and TM3 are the same as TM0.
相關PDF資料
PDF描述
W921C880 Microcontroller
W921E400A 4-Bit Microcontroller(4位微控制器)
W921E400 4-Bit Microcontroller(4位微控制器)
W925C240 Telephone Controller
W925E240 Telephone Controller
相關代理商/技術參數
參數描述
W921C880 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
W921E400 制造商:WINBOND 制造商全稱:Winbond 功能描述:4-BIT MICROCONTROLLER
W921E400A 制造商:WINBOND 制造商全稱:Winbond 功能描述:4-BIT MICROCONTROLLER
W921E840 制造商:WINBOND 制造商全稱:Winbond 功能描述:4-BIT MICROCONTROLLER
W921E840A 制造商:WINBOND 制造商全稱:Winbond 功能描述:4-BIT MICROCONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*