參數資料
型號: W78ERD2
廠商: WINBOND ELECTRONICS CORP
元件分類: 8位微控制器
英文描述: 8-BIT MICROCONTROLLER
中文描述: 8位微控制器
文件頁數: 7/72頁
文件大?。?/td> 606K
代理商: W78ERD2
W78ERD2
Publication Release Date: April 20, 2005
- 7 -
Revision A4
6. FUNCTIONAL DESCRIPTION
The W78ERD2 architecture consists of a core controller surrounded by various registers, four general
purpose I/O ports, one special purpose programmable 4-bits I/O port, 256 bytes of RAM, 1K AUX-
RAM, three timer/counters, a serial port and an internal 74373 latch and 74244 buffer which can be
switched to port2. The processor supports 111 different opcodes and references both a 64K program
address space and a 64K data storage space.
6.1 RAM
The internal data RAM in the W78ERD2 is 256 + 1K bytes. It is divided into two banks: 256 bytes of
scratchpad RAM and 1K bytes of AUX-RAM. These RAMs are addressed by different ways.
RAM 0H
7FH can be addressed directly and indirectly as the same as in 8051. Address pointers
are
R0 and R1 of the selected register bank.
RAM 80H
FFH can only be addressed indirectly as the same as in 8051. Address pointers are R0,
R1 of the selected registers bank.
AUX-RAM 0H
3
FFH is addressed indirectly as the same way to access external data memory with
the MOVX instruction. Address pointer are R0 and R1 of the selected register bank and DPTR
register. An access to external data memory locations higher than 3FFH will be performed with the
MOVX instruction in the same way as in the 8051. The AUX-RAM will be enabled after a reset.
Clearing the bit 1 in AUXR register will enable the access to AUX-RAM. When AUX-RAM is enabled
the instructions of "MOVX @Ri" will always access to on-chip AUX-RAM. When executing from
internal program memory, an access to AUX-RAM will not affect the Ports P0, P2,
WR
and
RD
.
Example,
ANL AUXR, #11111101B ; Enable AUX-RAM
MOV DPTR, #1234H
MOV A, #56H
MOVX @DPTR, A ; Write 56h data to external memory at address 1234H
MOV XRAMAH, #02H ; Only 2 LSB effective
MOV R0, #34H
MOV A, @R0 ; Read AUX-RAM data at address 0234H
6.2 Timers 0, 1 and 2
Timers 0, 1, and 2 each consist of two 8-bit data registers. These are called TL0 and TH0 for Timer 0,
TL1 and TH1 for Timer 1, and TL2 and TH2 for Timer 2. The TCON and TMOD registers provide
control functions for timers 0, 1. The T2CON register provides control functions for Timer 2. RCAP2H
and RCAP2L are used as reload/capture registers for Timer 2. The operations of Timer 0 and Timer 1
are the same as in the W78C51. Timer 2 is a 16-bit timer/counter that is configured and controlled by
the T2CON register. Like Timers 0 and 1, Timer 2 can operate as either an external event counter or
as an internal timer, depending on the setting of bit C/T2 in T2CON. Timer 2 has three operating
modes: capture, auto-reload, and baud rate generator. The clock speed at capture or auto-reload
mode is the same as that of Timers 0 and 1.
相關PDF資料
PDF描述
W78ERD2A40DN 8-BIT MICROCONTROLLER
W78ERD2A40FN 8-BIT MICROCONTROLLER
W78ERD2A40PN 8-BIT MICROCONTROLLER
W78IE52 8 BIT MICROCONTROLLER
W78IE54 8-BIT MTP Monitor Microcontroller(多次可編程的8位的監視微控制器)
相關代理商/技術參數
參數描述
W78ERD2_07 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78ERD2A 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78ERD2A40DL 功能描述:IC MCU 8-BIT 64K FLASH 40-DIP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO,I²C,LIN,UART/USART 外圍設備:DMA,LVD,POR,PWM,WDT 輸入/輸出數:27 程序存儲器容量:16KB(16K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤
W78ERD2A40DN 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78ERD2A40FL 功能描述:IC MCU 8-BIT 64K FLASH 44-PQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO,I²C,LIN,UART/USART 外圍設備:DMA,LVD,POR,PWM,WDT 輸入/輸出數:27 程序存儲器容量:16KB(16K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤