參數資料
型號: W25Q80BLSSIP
廠商: WINBOND ELECTRONICS CORP
元件分類: PROM
英文描述: 8M X 1 SPI BUS SERIAL EEPROM, PDSO8
封裝: 5.28 MM, GREEN, PLASTIC, SOIC-8
文件頁數: 5/75頁
文件大?。?/td> 2267K
代理商: W25Q80BLSSIP
W25Q80BL
Publication Release Date: July 08, 2010
- 13 -
Preliminary - Revision C
9.1.6
Complement Protect (CMP)
The Complement Protect bit (CMP) is a non-volatile read/write bit in the status register (S14). It is used in
conjunction with SEC, TB, BP2, BP1 and BP0 bits to provide more flexibility for the array protection. Once
CMP is set to 1, previous array protection set by SEC, TB, BP2, BP1 and BP0 will be reversed. For
instance, when CMP=0, a top 4KB sector can be protected while the rest of the array is not; when
CMP=1, the top 4KB sector will become unprotected while the rest of the array become read-only. Please
refer to the Status Register Memory Protection table for details. The default setting is CMP=0.
9.1.7
Status Register Protect (SRP1, SRP0)
The Status Register Protect bits (SRP1 and SRP0) are non-volatile read/write bits in the status register
(S8 and S7). The SRP bits control the method of write protection: software protection, hardware
protection, power supply lock-down or one time programmable (OTP) protection.
SRP1 SRP0
/WP
Status
Register
Description
0
X
Software
Protection
/WP pin has no control. The Status register can be written to
after a Write Enable instruction, WEL=1. [Factory Default]
0
1
0
Hardware
Protected
When /WP pin is low the Status Register locked and can not
be written to.
0
1
Hardware
Unprotected
When /WP pin is high the Status register is unlocked and can
be written to after a Write Enable instruction, WEL=1.
1
0
X
Power Supply
Lock-Down
Status Register is protected and can not be written to again
until the next power-down, power-up cycle.
(1)
1
X
One Time
Program
(2)
Status Register is permanently protected and can not be
written to.
Notes:
1. When SRP1, SRP0 = (1, 0), a power-down, power-up cycle will change SRP1, SRP0 to (0, 0) state.
2. This feature is available upon special order. Please contact Winbond for details.
9.1.8
Erase/Program Suspend Status (SUS)
The Suspend Status bit is a read only bit in the status register (S15) that is set to 1 after executing a
Erase/Program Suspend (75h) instruction. The SUS status bit is cleared to 0 by Erase/Program Resume
(7Ah) instruction as well as a power-down, power-up cycle.
9.1.9
Security Register Lock Bits (LB3, LB2, LB1)
The Security Register Lock Bits (LB3, LB2, LB1) are non-volatile One Time Program (OTP) bits in Status
Register (S13, S12, S11) that provide the write protect control and status to the Security Registers. The
default state of LB[3:1] is 0, Security Registers are unlocked. LB[3:1] can be set to 1 individually using the
Write Status Register instruction. LB[3:1] are One Time Programmable (OTP), once it’s set to 1, the
corresponding 256-Byte Security Register will become read-only permanently.
相關PDF資料
PDF描述
WMS128K8L-100DEME 128K X 8 STANDARD SRAM, 100 ns, CDSO32
WF1M32C-100G4TI 4M X 8 FLASH 12V PROM MODULE, 100 ns, CQMA68
WF1M32C-150G4TC 4M X 8 FLASH 12V PROM MODULE, 150 ns, CQMA68
W24010AK-15I 128K X 8 STANDARD SRAM, 15 ns, PDIP32
WS512K32-15G4TI 512K X 32 MULTI DEVICE SRAM MODULE, 15 ns, CQFP68
相關代理商/技術參數
參數描述
W25Q80BLSVIG 制造商:Winbond Electronics Corp 功能描述:8MB SERIAL FLASH MEMORY
W25Q80BLZPIG 制造商:Winbond Electronics Corp 功能描述:FLASH
W25Q80BLZPIGTR 功能描述:IC MEM FLASH 8M SPI 8-WSON RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:SpiFlash® 標準包裝:2,000 系列:- 格式 - 存儲器:RAM 存儲器類型:SRAM - 異步 存儲容量:256K (32K x 8) 速度:15ns 接口:并聯 電源電壓:3 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 封裝/外殼:28-TSSOP(0.465",11.8mm 寬) 供應商設備封裝:28-TSOP 包裝:帶卷 (TR) 其它名稱:71V256SA15PZGI8
W25Q80BLZPIP 制造商:WINBOND 制造商全稱:Winbond 功能描述:2.5V 8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q80BV 制造商:WINBOND 制造商全稱:Winbond 功能描述:8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI