![](http://datasheet.mmic.net.cn/160000/VTM3-B1CE-16M367673_datasheet_10279674/VTM3-B1CE-16M367673_4.png)
VTM3 Data Sheet
Vectron International 267 Lowell Rd, Hudson NH 03051
Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
Outline Diagrams, Pad Layout and Pin Out
Contact Pads are gold over nickel
Devices will be marked with the frequency
Pin 2,5,6,7,8 are used to program and adjust the TCXO during manufacturing and should be left open; do
not terminate these to the supply voltage and are a “make no connection” pad.
Figure 3, Package drawing
Pin 1, Ground or VC
Pin 2, NC
Pin 3, Ground
Pin 4, Output
Pin 5, NC
Pin 6, VCC
Pin 7, NC
Pin 8, NC