- 您現在的位置：買賣IC網 > PDF目錄359312 > V18MLN40805 (Littelfuse, Inc.) MLN SurgeArray⑩ Suppressor PDF資料下載
參數資料
| 型號： | V18MLN40805 |
| 廠商： | Littelfuse, Inc. |
| 英文描述： | MLN SurgeArray⑩ Suppressor |
| 中文描述： | 腸系膜淋巴結SurgeArray⑩抑制器 |
| 文件頁數： | 5/7頁 |
| 文件大小： | 1177K |
| 代理商： | V18MLN40805 |
184
www.littelfuse.com
Multiline Transient Voltage Surge Suppressor
MLN SurgeArray
Suppressor
RoHS
Soldering Recommendations
Lead (Pb) Soldering Recommendations
The principal techniques used for the soldering of components in surface
mount technology are IR Re-flow & Wave soldering.Typical profiles are
shown in Figures 14 & 15
The recommended solder for the MLN SurgeArray suppressor is a
62/36/2 (Sn/Pb/Ag), 60/40 (Sn/Pb) or 63/37 (Sn/Pb). Littelfuse also rec-
ommends an RMA solder flux.
Wave soldering is the most strenuous of the processes.To avoid the
possibility of generating stresses due to thermal shock, a preheat stage
in the soldering process is recommended, and the peak temperature of
the solder process should be rigidly controlled.
When using a reflow process, care should be taken to ensure that the
MLN chip is not subjected to a thermal gradient steeper than 4 degrees
per second; the ideal gradient being 2 degrees per second. During the
soldering process, preheating to within 100 degrees of the solderís peak
temperature is essential to minimize thermal shock.
Once the soldering process has been completed, it is still necessary to
ensure that any further thermal shocks are avoided. One possible cause
of thermal shock is hot printed circuit boards being removed from the
solder process and subjected to cleaning solvents at room temperature.
The boards must be allowed to cool gradually to less than 50C before
cleaning.
Lead-Free (Pb-free) Soldering Recommendations
Littelfuse offers the 0805 array as the preferred solution for lead-free sol-
dering conditions.
The preferred solder is 96.5/3.0/0.5 (SnAgCu) with an RMA flux, but
there is a wide selection of pastes & fluxes available with which the nick-
el barrier parts should be compatible.
The reflow profile must be constrained by maximums shown in Figure16.
For Pb-free Wave soldering, Figure 15 still applies.
Note: the Pb-free paste, flux & profile were used for evaluation purposes
by Littelfuse, based upon industry standards & practices.There are
multiple choices of all three available, it is advised that the customer
explores the optimum combination for their process as processes vary
considerably from site to site.
FIGURE 14. REFLOW SOLDER PROFILE
FIGURE 15. WAVE SOLDER PROFILE
FIGURE 16. LEAD-FREE RE-FLOW SOLDER PROFILE
T
o
C
TIME (MINUTES)
300
250
200
150
100
50
0
0.0
0.5
1.0
1.5
2.5
3.0
3.5
4.0
4.5
MAXIMUM WAVE 260
o
C
SECOND PREHEAT
FIRST PREHEAT
5.0 6.0 7.0
20 - 40 SECONDS WITHIN 5C
RAMP RATE
PREHEAT ZONE
<3C/s
<3C/s
60 > 217C
> 217C
230
FIGURE 14. REFLOW SOLDER PROFILE
FIGURE 15. WAVE SOLDER PROFILE
FIGURE 16. LEAD-FREE RE-FLOW SOLDER PROFILE
T
o
C
TI2.0
300
250
200
150
100
50
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
MAXIMUM WAVE 260
o
C
SECOND PREHEAT
FIRST PREHEAT
5.0 6.0 7.0
MAXIMUM TEMPERATURE 260C
MAXIMUM TEMPERATURE 260C
PREHEAT ZONE
60 - 150 SEC
230
相關PDF資料 |
PDF描述 |
|---|---|
| V18ZA40 | Varistor Products - Low to Medum Voltage, Radial Lead |
| V18ZA40P | Varistor Products - Low to Medum Voltage, Radial Lead |
| V18ZA40 | Radial Lead Metal-Oxide Varistors for Low to Medium Voltage Operation |
| V18ZA40X10 | Radial Lead Metal-Oxide Varistors for Low to Medium Voltage Operation |
| V18ZS3 | Radial Lead Metal-Oxide Varistors for Low to Medium Voltage Operation |
相關代理商/技術參數 |
參數描述 |
|---|---|
| V18MLN41206 | 制造商:LITTELFUSE 制造商全稱:Littelfuse 功能描述:Multiline Transient Voltage Surge Suppressor |
| V18MLN41206L | 制造商:LITTELFUSE 制造商全稱:Littelfuse 功能描述:Multiline Transient Voltage Surge Suppressor |
| V18MLN41206LWA | 功能描述:MULTI LAYER MULTI LINE VARISTOR RoHS:否 類別:過電壓，電流，溫度裝置 >> TVS - 變阻器，MOV 系列:MLN 標準包裝:400 系列:LU 變阻器電壓:540V 電流 - 浪涌:6.5kA 電路數:1 最大交流電壓:320VAC 最大直流電壓:420VDC 能量:150J 封裝/外殼:圓盤 20mm |
| V18MLN41206LWH | 功能描述:壓敏電阻 18V 100pF RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel |
| V18MLN41206LWT | 制造商:Littelfuse 功能描述:Var MLV 18VDC 20A 35V 1206 SMD T/R 制造商:Littelfuse 功能描述:Varistors Multi-Layer Multi Line SMF |
發布緊急采購，3分鐘左右您將得到回復。