- 您現在的位置：買賣IC網 > PDF目錄359312 > V18AUMLA1206 (Littelfuse, Inc.) Multilayer Transient Voltage Surge Suppressor PDF資料下載
參數資料
| 型號： | V18AUMLA1206 |
| 廠商： | Littelfuse, Inc. |
| 英文描述： | Multilayer Transient Voltage Surge Suppressor |
| 中文描述： | 多層瞬態電壓浪涌抑制器 |
| 文件頁數： | 7/9頁 |
| 文件大小： | 431K |
| 代理商： | V18AUMLA1206 |
Multilayer Transient Voltage Surge Suppressor
AUML Varistor Series
Surface Mount Varistors
164
www.littelfuse.com
Explanation of Terms
Maximum Continuous DC Working Voltage (VM(DC))
This is the maximum continuous DC voltage which may be applied, up to
the maximum operating temperature (125
o
C), to the ML suppressor.This
voltage is used as the reference test point for leakage current and is
always less than the breakdown voltage of the device.
Load Dump Energy Rating (WLD)
This is the actual energy the part is rated to dissipate under load dump
conditions (not to be confused with the
“
source energy
”
of a load dump
test specification).
Maximum Clamping Voltage (VC)
This is the peak voltage appearing across the suppressor when meas-
ured at conditions of specified pulse current and specified waveform
(8/20μs). It is important to note that the peak current and peak voltage
may not necessarily be coincidental in time.
Leakage Current (IL)
In the nonconducting mode, the device is at a very high impedance
(approaching 10
6
at its rated working voltage) and appears as an almost
open circuit in the system.The leakage current drawn at this level is very
low (<25μA at ambient temperature) and, unlike the zener diode, the
multilayer TVS has the added advantage that, when operated up to its
maximum temperature, its leakage current will not increase above 500μA.
Nominal Voltage (VN(DC))
This is the voltage at which the AUML enters its conduction state and
begins to suppress transients. In the automotive environment this voltage
is defined at the 10mA point and has a minimum (VN(DC) MIN) and
maximum (VN(DC) MAX) voltage specified.
Mechanical Dimensions
Recommended Pad Outline
D
E
W
L
Next
Previous
相關PDF資料 |
PDF描述 |
|---|---|
| V18MA1S | Varistor Products - Axial Lead |
| V18MLE0805 | Multilayer Transient Voltage Suppressor |
| V18MLE0805L | Multilayer Transient Voltage Suppressor |
| V18MLN40805 | MLN SurgeArray⑩ Suppressor |
| V18ZA40 | Varistor Products - Low to Medum Voltage, Radial Lead |
相關代理商/技術參數 |
參數描述 |
|---|---|
| V18AUMLA1206_06 | 制造商:LITTELFUSE 制造商全稱:Littelfuse 功能描述:Multilayer Transient Voltage Surge Suppressor |
| V18AUMLA1206A | 功能描述:壓敏電阻 23V Automotive RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel |
| V18AUMLA1206H | 功能描述:壓敏電阻 23V Automotive RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel |
| V18AUMLA1206NA | 功能描述:壓敏電阻 23V Automotive RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel |
| V18AUMLA1206NH | 功能描述:壓敏電阻 23V Automotive RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。