參數資料
型號： UPD16300GF-3L9
英文描述： AC/DC Plasma Display Driver
中文描述： 交流/直流等離子體顯示驅動程序
文件頁數： 19/20頁
文件大?。?/td> 157K
代理商： UPD16300GF-3L9
Data Sheet S15859EJ1V0DS
19
μ
PD160040
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
DD
or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
相關PDF資料
PDF描述
UPD16301GF-3B9 AC/DC Plasma Display Driver
UPD16302GF-3L9 Electroluminescent Display Driver
UPD16304GF-3L9 Vacuum Fluorescent Display Driver
UPD16305GF-3L9 AC/DC Plasma Display Driver
UPD16306A UPD16306A Data Sheet | Data Sheet[07/1996]
相關代理商/技術參數
參數描述
UPD16301GF-3B9 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AC/DC Plasma Display Driver
UPD16302GF-3L9 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Electroluminescent Display Driver
UPD16304GF-3L9 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Vacuum Fluorescent Display Driver
UPD16305GF-3L9 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AC/DC Plasma Display Driver
UPD16306A 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UPD16306A Data Sheet | Data Sheet[07/1996]
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*