
Photops
Photodiode-Amplifier Hybrids
"
FEATURES
Detector/Amplifier
Combined
Adjustable Gain/Bandwidth
Low Noise
Wide Bandwidth
DIP Package
Large Active Area
"
APPLICATIONS
General Purpose Light
Detection
Laser Power Monitoring
Medical Analysis
Laser Communications
Bar Code Readers
Industrial Control Sensors
Pollution Monitoring
Guidance Systems
Colorimeter
The Photop Series, combines a photodiode with an operational
amplifier in the same package. Photops general-purpose detectors
have a spectral range from either 350 nm to 1100 nm or 200 nm to
1100nm. They have an integrated package ensuring low noise output
under a variety of operating conditions. These op-amps are specifically
selected by UDT Sensors engineers for compatibility to our photodiodes.
Among many of these specific parameters are low noise, low drift and
capability of supporting a variety of gains and bandwidths determined by
the external feedback components. Operation from DC level to several
MHz is possible in an either unbiased configuration for low speed, low
drift applications or biased for faster response time. LN-Series Photops
are to be used with OV-bias.
Any modification of the above devices is possible. The modifications
can be simply adding a bandpass optical filter, integration of additional
chip (hybrid) components inside the same package, utilizing a different
op-amp, photodetector replacement, modified package design and / or
mount on PCB or ceramic. For your specific requirements, contact one
of our Applications Engineers.
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk