
1996 Jan 15
2
Philips Semiconductors
Product specification
Advanced pager receiver
UAA2080
FEATURES
 Wide frequency range: VHF, UHF and 900 MHz bands
 High sensitivity
 High dynamic range
 Electronically adjustable filters on chip
 Suitable for data rates up to 2400 bits/s
 Wide frequency offset and deviation range
 Fully POCSAG compatible FSK receiver
 Power on/off mode selectable by the chip enable input
 Low supply voltage; low power consumption
 High integration level
 Interfaces directly to the PCA5000A, PCF5001 and
PCD5003 POCSAG decoders.
APPLICATIONS
 Wide area paging
 On-site paging
 Telemetry
 RF security systems
 Low bit-rate wireless data links.
GENERAL DESCRIPTION
The UAA2080 is a high-performance low-power radio
receiver circuit primarily intended for VHF, UHF and
900 MHz pager receivers for wide area digital paging
systems, employing direct FM non-return-to-zero (NRZ)
frequency shift keying (FSK).
The receiver design is based on the direct conversion
principle where the input signal is mixed directly down to
the baseband by a local oscillator on the signal frequency.
Two complete signal paths with signals of 90
°
 phase
difference are required to demodulate the signal.
All channel selectivity is provided by the built-in IF filters.
The circuit makes extensive use of on-chip capacitors to
minimize the number of external components.
The UAA2080 was designed to operate together with the
PCA5000A, PCF5001 or PCD5003 POCSAG decoders,
which contain a digital input filter for optimum call success
rate.
ORDERING INFORMATION
TYPE
NUMBER
PACKAGE
NAME
DESCRIPTION
VERSION
UAA2080H
UAA2080T
UAA2080U
LQFP32
SO28
28 pads
plastic low profile quad flat package; 32 leads; body 7
 ×
 7
 ×
 1.4 mm
plastic small outline package; 28 leads; body width 7.5 mm
naked die; see Fig.9
SOT358-1
SOT136-1