參數資料
型號： TUA4401K
廠商： INFINEON TECHNOLOGIES AG
元件分類： 接收器
英文描述： FM, AUDIO SINGLE CHIP RECEIVER, PQFP44
封裝： MQFP-44
文件頁數： 16/41頁
文件大?。?/td> 990K
代理商： TUA4401K
Functional Description
3 - 15
TUA 4401K
Wireless Components
Specification, 17.02.00
+/- (12.5 kHz...200 kHz) for D7=1 in subaddress 05H. The results IF_CENT
and IF_WINDOW are read out via bus (read-subaddress 82H&83H) or pin
Station_Detect.
If the IF frequency is into the preselected window, Station_Detect goes from
high to low level. If the IF frequency is outside the preselected window,
Station_Detect is high. The bit IF_WINDOW is a hint IF-frequency that is to
low (IF_WINDOW=high) or is to high (IF_WINDOW=low).
In addition to the frequency measurement, thresholds for multipath and field-
strength voltages can be programmed via bus (subaddress 0BH).
Station_Detect will only go to low level in case of field-strength and multipath
voltages are beyond the thresholds and the frequency is inside the window.
When setting the thresholds to zero multipath and fieldstrength evaluation is
disabled.
7. Crystal oscillator
A master crystal oscillator provides all necessary clock frequencies for the
whole IC. A 61.5 MHz crystal is used in 3rd harmonic mode.
The oscillator frequency can fine tuned with a serial bus controlled 4 bit D/A
converter.
The crystal frequency is used as reference frequency for the PLL oscillator
and IF counter. It is also used as clock for the ADC’s. Finally the crystal fre-
quency divided by 6 (10.25 MHz) is available at a pin as low pass filtered
voltage, it can be disabled with the serial bus.
8. Output ports
PORT_1 / 2 are NMOS Open drain outputs.
9. I2C Bus
The TUA4401K supports the I2C bus protocol (2 wire). All bus pins ( SCL,
SDA) are Schmitt triggered input buffer for 3V or 5V
C.
The bit stream begins with the most significant bit (MSB), is shifted in (write
mode) on the low to high transition of CLK and is shifted out (read mode) on
the high to low transition of CLK
I2C bus mode:
Data Transition:
Data transition on the pin SDA must only occur when the clock SCL is low.
SDA transitions while SCL is high will be interpreted as start or stop condi-
tion.
Start Condition (STA):
A start condition is defined by a high to low transition of the SDA line while
SCL is at a stable high level.This start condition must precede any command
and initiate a data transfer onto the bus.
Stop Condition (STO):
A stop condition is defined by a low to high transition of the SDA while the
SCL line is at a stable high level. This condition terminate the communication
between the devices and forces the bus interface into the initial conditions.
相關PDF資料
PDF描述
TUA4401 FM, AUDIO SINGLE CHIP RECEIVER, PQFP64
TUA6010XS 2-BAND, VIDEO TUNER, PDSO28
TUA6010XS VIDEO TUNER, PDSO28
TUA6014-K 2-BAND, VIDEO TUNER, PDSO28
TUA6014-S 2-BAND, VIDEO TUNER, PDSO28
相關代理商/技術參數
參數描述
TUA6010 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Wireless Components
TUA6010X 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RF Mixer
TUA6010XS 制造商:Rochester Electronics LLC 功能描述:- Bulk
TUA6012 制造商:SIEMENS 制造商全稱:Siemens Semiconductor Group 功能描述:Components for Entertainment Electronics
TUA6012XS 制造商:SIEMENS 制造商全稱:Siemens Semiconductor Group 功能描述:Components for Entertainment Electronics
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*