![](http://datasheet.mmic.net.cn/130000/TUA4401_datasheet_5023308/TUA4401_2.png)
TUA 4401
CAR RADIO
Wireless Products
14.06.99
PAGE: 1
General Description:
The TUA 4401 is a carradio IC using BICMOS technology. The combination of
an analog FM receiver and a digital PLL synthesizer on the same chip reduces
the overall pin count in comparison of two separate ICs and in addition the
number of necessary external components. This gives the flexibility both for
high performance and low cost applications. The recommended applications for
this device are FM only carradios and background receivers, capable for all
world standards.
1. Frontend
Features:
strictly symmetrical RF sections
high level, high impedance mixer input with improved dynamic range
high input / output 3rd order interception point
balanced or unbalanced use of the mixer
bus controlled AGC threshold
2 pin LO with improved low phase noise, internally coupled to PLL
PLL with fast acquisition mode
resolution 100kHz, 50kHz, 25kHz, 12.5kHz, and 6.25kHz
high running crystal oscillator (61.5MHz) to avoid interference with bus
controlled adjustment
2. IF amplifier, demodulator, and STOP informations
Features:
low noise amplifier
gain adjust with DC control voltage or serial bus possible
7 stage IF limiter with extended signalstrength range
signalstrength DC and ADC output available
low distortion coincidence demodulator (using short loop AFC principle)
with MPX output
soft mute for weak signal conditions with adjustable bus controlled mute
depth
multipath detector with high pass filter, analog output, and ADC output
IF counter for search tuning stop with selectable IF center frequency and
window width
STS informations -in window- , -below- , -beyond- available