參數資料
型號： TSPC106AVGS
廠商： Atmel Corp.
英文描述： PCI Bus Bridge Memory Controller 66-83 MHz
中文描述： PCI總線橋66-83 MHz的內存控制器
文件頁數： 18/41頁
文件大?。?/td> 581K
代理商： TSPC106AVGS
18
TSPC106A
2102C–HIREL–01/05
Interrupt, Clock and Power Management Signals
The TSPC106 coordinates interrupt, clocking, and power management signals across the memory bus, the PCI bus and
the 60x processor bus.
IEEE 1149.1 Interface Signals
To facilitate system testing, the TSPC106 provides a JTAG test access port that complies with the IEEE 1149.1 boundary-
scan specification.
Table 8.
Interrupt, Clock and Power Management Signals
Signal
Signal Name
Number of
Pins
I/O
Signal Description
CKO
DWE2
Test clock
1
O
CKO provides a means to monitor the internal PLL output or the bus clock
frequency. The CKO clock should be used for testing purposes only. It is not
intended as a reference clock signal.
HRST
Hard reset
1
I
Initiates a complete hard reset of the TSPC106. During assertion, all bi-
directional signals are released to a high-impedance state and all output signals
are either in a high impedance or inactive state.
NMI
Nonmaskable
interrupt
1
I
Indicates that an external device (typically an interrupt controller) has detected a
catastrophic error. In response, the TSPC106 asserts MCP on the 60x
processor bus.
QACK
Quiesce
acknowledge
1
O
Indicates that the TSPC106 is in a low-power state. All bus activity that requires
snooping has terminated and the 60x processor may enter a low-power state.
QREQ
Quiesce request
1
I
Indicates that a 60x processor is requesting that all bus activity involving snoop
operations pause or terminate so that the 60x processor may enter a low-power
state.
SUSPEND
Suspend
1
I
Activates the suspend power-saving mode.
SYSCLK
System clock
1
I
SYSCLK sets the frequency of operation for the PCI bus and provides a
reference clock for the phase-locked loop (PLL) in the TSPC106. SYSCLK is
used to synchronize bus operations. Refer to section “Clocking” on page 19 for
more information.
Table 9.
IEEE 1149.1 Interface Signals
Signal
Signal Name
Number of
Pins
I/O
Signal Description
TCK
JTAG test clock
1
I
Input signals to the test access port (TAP) are clocked in on the rising
edge of TCK. Changes to the TAP output signals occur on the falling
edge of TCK. The test logic allows TCK to be stopped.
TDO
JTAG test data
output
1
O
The contents of the selected internal instructions or data register are
shifted out onto this signal on the falling edge of TCK. TDO will remain
in a high-impedance state except when scanning of data is in progress.
TDI
JTAG test data
input
1
I
The value presented on this signal on the rising edge of TCK is clocked
into the selected JTAG test instruction or data register.
TMS
JTAG test mode
select
1
I
This signal is decoded by the internal JTAG TAP controller to
distinguish the primary operation of the test support circuitry.
TRST
JTAG test reset
1
I
This input causes asynchronous initialization of the internal JTAG TAP
controller.
相關PDF資料
PDF描述
TSPC106 PCI Bus Bridge Memory Controller 66-83 MHz
TSPC106A PCI Bus Bridge Memory Controller 66-83 MHz
TSPC106AMG PCI Bus Bridge Memory Controller 66-83 MHz
TSPC106AVG PCI Bus Bridge Memory Controller 66-83 MHz
TSPC106AMGS PCI Bus Bridge Memory Controller 66-83 MHz
相關代理商/技術參數
參數描述
TSPC106AVGS66CE 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
TSPC106AVGS66CG 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
TSPC106AVGS83CE 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
TSPC106AVGS83CG 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
TSPC106AVGSU/T66CE 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*