- 您現在的位置：買賣IC網 > PDF目錄361538 > TSP180-124 (TRACO ELECTRONIC AG.) Industrial Power Supplies (TSP Series, 78 - 600 Watt) PDF資料下載
參數資料
| 型號： | TSP180-124 |
| 廠商： | TRACO ELECTRONIC AG. |
| 英文描述： | Industrial Power Supplies (TSP Series, 78 - 600 Watt) |
| 中文描述： | 工業電源（TSP的系列，78 - 600瓦） |
| 文件頁數： | 6/11頁 |
| 文件大小： | 930K |
| 代理商： | TSP180-124 |
http://www.tracopower.com
Page 6 of 11
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Industrial Power Supplies
TSP Series
78–600 Watt
TSP–BFM24 Buffer Module
The TSP-BFM24 Buffer Module will hold the output voltage of a 24VDC power sup-
ply after brown outs or voltage dips of up to ten full 50Hz cycles. During this buffer
period no deterioration of the 24VDC output voltage will occur. For many applica-
tions this buffer module is an ideal and cost effective alternative to a battery based
backup system. The buffer module consists of a large bank of capacitors. When the
power supply is switched on, the buffer capacitors will be charged. This will take
approximately 30 second and an opto-coupler signal is indicating the READY“
condition. When a power fail occurs, the capacitor bank is discharged, maintaining
the output of the buffer module at its nominal voltage. This condition is indicated by
an POWER FAIL“ signal. The hold up time is typically 200ms at 25A and 4 seconds
typically at 1,2A. After 4 seconds the buffer device will switch off the output voltage.
The operation modes of the module are indicated by a LED on the front panel also.
The big advantage of this buffer solution is, that it is fully maintenance free and its
storage capability does not deteriorate over the live time of the product.
Order code
(includes terminal plugs)
Operating Voltage
Range
Buffer Time
Output Power
max.
TSP-BFM24
24...28VDC
200ms typ. @ 25A max.
4.0 s max. @1.2A
600 W
Models
Function Diagram
Connector Positions
TSP
Load
Inhibit
Volt adjust
Voltage
Detection
Voltage
Detection
Discharge
Charge
Active
Ready
J2.2
J2.1
J1.1
J1.2
J1.3
J1.4
J2.4
J2.3
J2.6
J2.5
Specifications
Operating temperature
Electromagnetic compatibility
Buffer voltage
Charging
Status signals
Inhibit
Dimensions
– 25°C...+70°C max. (–13°F...+158°F)
derating above 40°C (104°F)
: 1.5%/K
in correspondence to connected units (no internal
switching device)
adjustable, >1V below input voltage, min. 22VDC
0.6A max. / 30s max.
Buffer Active , Buffer Ready (optocoupler output)
and dual colour LED for status indication
optocoupler input: 35V max. <5mA
same as model TSP 140
(see page 8)
相關PDF資料 |
PDF描述 |
|---|---|
| TSP600-124 | Industrial Power Supplies (TSP Series, 78 - 600 Watt) |
| TSP090-124 | Industrial Power Supplies (TSP Series, 78 - 600 Watt) |
| TSP090-124N | Industrial Power Supplies (TSP Series, 78 - 600 Watt) |
| TSP090SC | SURFACE MOUNT BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE |
| TSP140SA | SURFACE MOUNT BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TSP180-124EX | 制造商:Traco Power 功能描述:DIN Rail PSU, 24Vdc, 7.5A, 180W |
| TSP180-124WR | 制造商:Traco Power 功能描述:DIN Rail PSU, 24Vdc, 7.5A, 180W |
| TSP180-148 | 制造商:Traco Power 功能描述:DIN Rail PSU, 48Vdc, 4A, 192W |
| TSP180A | 制造商:FCI 制造商全稱:First Components International 功能描述:THYRISTOR SURGE PROTECTOR SMB TYPE SURFACE MOUNT |
| TSP180AL | 制造商:FCI 制造商全稱:First Components International 功能描述:THYRISTOR SURGE PROTECTOR AXIAL LEAD TYPE |
發布緊急采購，3分鐘左右您將得到回復。